The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating System gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating.
- Easy To Apply and Provides Extremely Durable Finish
- Economical - Quick Color Changes - Coat and Cure In Under An Hour!
- Operates on Standard 120v / 60Hz Household Current
- Versatility with two settings for improved coverage
- Low 15,000-Volt Setting and High 25,000-Volt Setting For Multi-Coat Coverage Over Larger Areas
- Increased Powder Adhesion and Minimal Overspray
The Hotcoat Benchtop Powder Booth is a simple but effective conversion kit that transforms a 20 inch box fan into a booth for powder coating.
- Captures Over 95% of Powder Overspray
- Compact Size and Easy to Assemble
- Uses Your Standard 20 Inch Box Fan
- Perfect For Powder Coating in a Garage or Small Shop
- Includes Rods For Hanging Parts
The Eastwood Hotcoat Filter Tack Spray transforms pleated fiberglass HVAC filters into a powder coat "trap" capturing and eliminating 99% of overspray in your shop. The Filter Tack Spray is a environmentally-friendly, non toxic coating that treats 10 standard 20" x 20" x 1" filters.
Eastwood HotCoat® PCS-250 Powder Coating System Specifications
15KV/25KV dual voltage output
New and improved ground clamp provides a better ground
Color coordinated cabling for easier setup
New clear bottle makes it easy to see powder level and fluidizing action
Additional 1/2" of trigger room makes it easier and more comfortable to use
Eastwood HotCoat® BenchTop Powder Coating Booth Kit Specicfications
Box Fan Size: 20" (Commonly available at Walmart or Home Depot)
Air Filter Size: 20" x 20" x 1" HVAC/furnace air filter, pleated, fiberglass type only.
MERV rating not impactful.
Frame Construction: 18 gauge (1.2mm) steel, black powder coat
Contents
(1) 33278 Eastwood Hotcoat PCS-250 Dual Voltage Powder Coating System
(1) 70016 HotCoat BenchTop Powdercoating Booth
(1) 72054 HotCoat 20x20x1 Powder Booth Filter
(1) 69481Z HotCoat Filter Tack Spray
Box Fan is not included