Used condition but 100 % tested and working.
For a unit of this age and to be used it is In good condition.
Missing both of the security bolt covers.
Missing 2 of the security bolts
Has typical scuffs, scratches and dings. The air filter cover has some plastic chipping please refer to all the images.
Unit was temporarily wired with 120v to fully test each component to which it passed. A few times it remained running for 5 seconds after my hands were removed from range of the sensor. Both sides functioned as they should.
All the infrared sensors function 100% and the motor is very strong and healthy.
The air filter is dirty. A new one would be highly recommended.
I am able to get nearly every part brand new directly from Dyson, which most people in North America are not able to source.
The front facia where the two bottom security screws are inserted have cracked pieces as shown however it still is held down by the security screw.
The wall mount bracket is not included however the back metal housing can still be mounted directly to the wall.
I used to refurbish these, however I found most people were buying them just for parts or didn’t care for condition so if you want a complete new set of security bolts, brand new housing, the back mounting plate, literature or anything else reach out and I can have that arranged.
As it sits, it still is a fully functional working unit and if you’re OK with some cosmetic issues This will be more than satisfactory.
Please refer to all the images and if you have any questions don’t hesitate to reach out !