This is a Double Ryobi 18v One+ Battery Holder and can be mounted on the wall, pegboard* with holes at 1" on center, and Ryobi Link Wall Rails. It holds 2 18v One+ Batteries at a 10-degree angle. Edges are mitered to be smooth and durable.
If mounting to the wall with screws or Ryobi Link Wall Rails, pegs stay recessed on the back and are not used. If mounting on pegboard*, pry pegs (with a small flat screwdriver) out and push into the holes. 2 curved pegs go into the top holes pointing upward and 2 straight pegs go into the bottom holes. We recommend you superglue them into place. 2 extra pegs (one curved & one straight) are included. If mounting to the Ryobi Link Wall Rails, it can be used with or without an additional screw to hold it into place.
If you want to mount multiple Ryobi One+ Batteries on the Ryobi Link Wall Rail that are evenly spaced, we recommend you also purchase our Single Ryobi One+ Battery holder and alternate them (1-2-1-2 etc.). See photo of both battery holders mounted on Ryobi Link Wall Rails.
No Ryobi batteries are included. Batteries shown in photos are for reference purposes only.
* Note that there are many different types of pegboard and some may not work. This was designed to work on 3/16" thick masonite pegboard with holes at 1" (25.4mm) on center only.
It is 3D-printed in black PLA plastic. It is 5" x 3.5" x 2.7" (127mm x 90mm x 69mm).
This item is 3D Printed in PLA plastic which is made from a renewable resource. It’s biodegradable and eco-friendly. These are lightweight and due to the printing process, there may be some imperfections. 3D Printing involves the heating and depositing of material on a flat board one layer at a time. Each model is custom printed to order. I print these as a hobby and am not a large scale manufacturer. They are all printed in the USA. Please see my other listings for more designs.