|
Model: Op-fill can be heat to 200 º C in 3s, can be melting all
kinds of Gutta percha.It support the vertical compaction of Gutta percha for
the root canal filling. It is intended exclusively for use by trained dentiet
only in clinic or laboratory.
Safety caution:
The temperature of tip is very high during the surgery , in order to prevent
from being burned, please avoid it directly contact to the soft tissue.
Specification:
Charging system
Operating Voltage DC.3.6V
Adaptor Input: AC 100V/220V 50-60HZ
Power: 10w
Charging time 4 hours
Packing size: 165*125*38mm
Usage:
Heat: Press the button to heat the tip, the Led indicator light red.The tip can
reach working temperature within 3 second.
Charge:Put the obturation pen onto the charging base, the LED indicator light blue.The
unit should be continuous charging more than 8 hours from low voltage to full
charge.
Package includes:
Charging
Base-----1 PC
Obturation
Pen-----1 PC
Pen
Tip -----2PCS
&
A-BLADE Feature：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure ,
repeated use.
Technical：
1. Charger voltage: 110V-240V 50-60Hz
2. Battery: 1.2V 2400mAh
3. Power: 2.5W
4. Weight:0.35kg
5. Packing size: 15 x 12 x 3.5 (CM）
Charging
1,
First,charge the instrument by connecting the charging station to a mains power
socket
2, Plug the handipece into the socket in the charging station . While the
instrument is charging,the LED lights up on the handpiece.
Use: Fit a cutting tip onto the handpiece.Make sure that the angle of
the tip is pointing in the opposite direction to the operating button,This
makes work easier.
Important: Never bend the tip while it is still in the handpiece.
1, Insert the cutting tip into the cavity while it is cold (without pressing
the operating button).The gutta-percha point to be cut off must be encircled by
the loop of the cutting tip.
2, As soon as the cutting tip is located directly on the canal access,press
the operating button.
3, The tip heats up in seconds and the
gutta-percha point can be quickly and cleanly removed.
4, After the point has been cut off ,release the operating button. The cutting
tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only
switches the button is released,the instrument switches off.
5, Remove the cutting tip from the handpiece after use.
Important:Please don＇t continue to
press the button more than 30 seconds.
|
