Descriptions

Dental Cordless Curing Light 1 Second Cure Lamp 2400mW/cm²

Introduction:

1.Technical specifications：

1.1 Dimensions: 250mm×250mm×240mm

1.2 Net weight: 278g

1.3 Power source

1.3.1 Power supply: rechargeable Lithium battery

1.3.2 Battery mode: ICR 18490

1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.

1.3.4 Adapter Power Input: 100V to 240V, 50Hz/60 Hz
     Input Power: 10VA Power      Output: DC5V/1A

1.4 Light source:

1.4.1 5W high power blue light LED

1.4.2 Checking method: the LED light is fine when the light is on during operating correctly.

1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M,   etc.

1.4.4 Wave length: 440nm-480nm

1.5 Light intensity:1000-2400mW/cm²

P1 Strong mode:1800-2400mW/cm²

P2 Standard mode:1000mW/cm²~1600mW/cm²

P3 Pulse mode:1200mW/cm²~1600mW/cm²

2. Operation：

2.1 Press the mode button. Following two modes are available.

2.1.1 Strong Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 1800-2400mW/cm²

2.1.2 Standard Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000-1600 mW/cm²

2.1.3 Pulse Mode: screen shows P3, press the time button to select of time cold be 5s, 10s, 15s, 20s. It’s output light intensity is about 1000-1600 mW/cm²

2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".

2.3 During operation, the blue light can be stopped by press the power button at any time.

2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.

2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.

2.6 When the battery needs to be charged, connect the plug of the adapter into the AC100V~240V power supply. Then connect the output plug of the adapter to the DC 5.0V input plug of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging.

2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse.

2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button.

2.9 The depth of solidification of composite is no less than 2mm per 1 second.

Material: The handle is made of plastic，The lamp holder is made of metal

///////////////////////////////////////////////////////////////////////////////////////////////////

 F*LED-B Max 1500mw/cm2

Descriptions:

Woodpecker Style Dental Curing Light LED.B

Feature:

Model:LED.B

Wireless

Long standby time

Working more efficiently

Function Keys:

ON/OFF button：

1.Turn on or turn off the LED blue-ray output

2.Can make the machine run

Time setting: 5s, 10s, 15s, 20s,25s,30s,35s,40s

Technical:

Changer input: AC 110V—240V50—60Hz

The changer output: DC5V  1A

Lithium battery voltage: DC4.2V

Lithium battery capacity:2200mAh

Output optical wavelength:420-480nm

Output light intensity:1200—1500mw/cm²

Package:

1 X Curing light

1 X High capacitance rechargeable battery

1 X Charger

1 X Charger socket

General Introduction:

This curing light has the advantages of adjustable working time, visible working time and high curing efficiency. When the curing light is charging, the charger socket can display the charging status. (Charging: the indicator light is on, Charging over: the indicator light is off. The curing light is removed from the charging socket: Indicator Light begins to flash). When this machine is working, every 5 seconds the buzzer will make a sound of “di” to remind you, at the same time, the screen displays the remaining work time. Nonworking time, this machine can automatic shutdown without any operation in 120 seconds to save electric power. With this machine off, press any key to turn on the curing light

////////////////////////////////////////////////////////////////////////

1400mw/cm² White 

NEW Dental Light Cure Lamp Cordless metal head LED 1S Dental Curing Light

Product Description

Parameter：

Wavelength：440-480nm

Light power：5W

Intensity：800-1400mw/cm²

Battery：Li-on 800mAh

Input voltage：AC100-240V, 50/60Hz 0.4A Max

Output voltage：DC 5V/1.5A

Net Weight：155g

Mode selection：P1, P2, P3

Solidification time：1S,3S,5S,10S,15S,20S

 Features:

·Produce the maximum light intensity safely.

· A high intensity of 1400 mW/cm².

· Offers extremely short curing times of no more than 3 seconds.

· Cordless, highly portable and light weight (only 155g).

· High-performance Li-ion battery technology.

· LED panel conveniently indicates a countdown curing time.

· Battery can be fully recharged in 90 minutes.

· Battery with protection against over-voltage, over-current and short circuit.

· 3 versatile curing modes for every indications.

· Automatic power off, low battery alert.

· Color : White . 

Operation conditions:

• Storage Condition: Temperature: +10℃+40℃
• Humidity: 30%-75%
• Atmospheric pressure: 70KPa-106Kpa
• Environment Conditions: Not near from fire equipment or flammability material.

Packing list:  

The host       * 1                  

Metal lamp holder *1

The silicone base  *1

Power adapter     *1

Disposable protective sleeve  *1

Shade plate  *1

Product specification   *1

/////////////////////////////////////////////////////////

1200mw/c㎡

Colorful LED Curing Light

 Description：
1. LED Screen，high quality plastic handle.
2. Noiseless and no vibration when working
3. Lithium battery with large capacity
4. Three Modes: Gradually mode/Flashing mode/All light mode
5. Automatically power down: It will be turned automatically off automatically without pressing button for 3 minutes.
6. Solidification time is :40s. Every ten seconds, sound signal to remind operator. The length of work time can be controlled freely. 
7. lt has self-protection against exceeding heat after continuous long time work that p o w e r – off  by itself. After the temperature is normal, operator can use it again. 
8. The LED is longevity. Cold light source, no fan. Avoid the infection, cause of air movement. 

Features:
Packing Size: 210*148*71 mm(unit)
Packing weight: 420g
Wavelength: 440-480nm
Light Intensity: 5W≥1200mw/c㎡
Input Voltage: 100-240V 50-60HZ
Battery Capacity: DC3.7v 2200mAh
Solidification Effect:5s/3mm

Color available:
green/silver/blue/black/purple/Orangered/golden
Please email us or leave us message if you need different color in 2 working days,
Or we will send one as the picture show, thanks !

//////////////////////////////////////////////////////////////////

Max 1400mW/cm2

VRN Dental Wireless LED Curing Light 1400 mW/cm² 2200mAh battery capacity

3S curing

Product Parameter:
-VOLUME: 33 mm x 29 mm x 246 mm

-Net weight: 132 g

-Power supply:

Chargeable battery: 3.7 V, capacity:2200 mAh, with Protection for over voltage, over current and short-circuits.

-Power adaptor:  AC100~240 V 50/60 Hz   Input power: 10 VA   Out power: DC 4.2 V/0.5 A

-LED light feature: 5W blue LED light

-Wave length: 400 nm~515 nm

-Accessible emission limit (AEL): 3.9x10 J

-Checking: LED light is working when correctly

-Operate Radiation: 1000mW/cm² ~1400mW/cm²

-Optical effective area of optical fiber:50 mm²

Operation:
1 . Choose one of three operation modes by pressing the mode switch button on the curing light.

• Full power: The screen shows 01, the blue light radiates in full power, light intensity: 1000mW/cm² ~1400mW/cm².(recommending mode for clinical)
• Progressive: The screen shows 02, the blue light power increase stronger continually, after 5 seconds reaches to the highest power，light intensity: 1000mW/cm² ~1400mW/cm².
• Pulse: The screen shows 03, the blue light works on the pulse condition. light intensity: 1000mW/cm² ~1400mW/cm^2.

•  Press the "T"time set button to choose from3, 5,10, 15, 20, 25, 30, 35, 40 seconds for working time.
• When the shooting period is done, press the "I" on/off button again for next shooting period. If the device becomes hot, the user should stop using the device and wait till the device cooling down. Recommending shooting period is not over 10 times.
• Low battery alert: This device contains the low battery checking function. When the battery is low of power, the screen will blink.
• The device will be automatically power off after 1 minutes in idle, and press any button to start.
• The solidification effect for composite resin is not less than 4mm in 10 seconds.

Packing list:

• Main unit         1pcs
• Manual           1pcs
• QC certification     1pcs
• Power adapter     1pcs
• Optical fiber tip     1pcs
• Battery           1pcs
• Light hood         1pcs

Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:Dentalinchina City,State:SHENZHEN,China Telephone number:0755-6895621
Payment
We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation. Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Shipping
The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal.
Return
If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund. We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges. You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts. Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
Feedback
Your feedback is VERY important to us ^_^ Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues.
Contact Us
Serivce is our #1 priority ! If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy . We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!