Soft tissue trimming needle
Characteristics and use method
Cutting soft tissue does not bleed
Cut excess gum tissue
Cuff trimming for planting nest
Good effect for gingival drainage
High speed creates hot condensation to stop bleeding
Strong wear resistance
Mounted on a high-speed turbine
Speed: 300,000-450000 rpm
Recommended air pressure :3.0-3.2MPa
Matters needing attention
High speed cutting, not cold forever
At a 45° Angle to the cutting surface
Press lightly, not too hard
The incision is smooth and conducive to healing
Appropriate use of linen materials
The RPM is too low to stop bleeding
Larger operation space than electric knife
xerosis
1.For cutting soft tissue. Keep the soft tissue trimming bur at an angle of 90 degrees to the cutting surface and press gently.
2.For gingival retraction. Place the needle in the gingival sulcus, close to the gum side at a 45-degree angle to the long axis of the tooth, and rotate 3-4 clockwise or counterclockwise to gingival effect. This method removes gingiva quickly and reduces bleeding.
3. For cutting small amounts of hyperplastic gums.
Feature:
1.Normal disinfection in hot air sterilizer or autoclave. During the entire disinfection process, make sure that nothing else can be damagedTip of soft tissue bur.
2.The ceramic working part of the bur is more sensitive than conventional surgical steel or tungsten steel burs. If using a disinfectant solution for cleaning, soft tissueThe bur must be carefully inserted into the tweezers.
3. After reaching the prescribed time, remove the soft tissue needle from the disinfectant solution, rinse and dry.
Package : 1 Pcs/Bag
2.For gingival retraction. Place the needle in the gingival sulcus, close to the gum side at a 45-degree angle to the long axis of the tooth, and rotate 3-4 clockwise or counterclockwise to gingival effect. This method removes gingiva quickly and reduces bleeding.
3. For cutting small amounts of hyperplastic gums.
Feature:
1.Normal disinfection in hot air sterilizer or autoclave. During the entire disinfection process, make sure that nothing else can be damagedTip of soft tissue bur.
2.The ceramic working part of the bur is more sensitive than conventional surgical steel or tungsten steel burs. If using a disinfectant solution for cleaning, soft tissueThe bur must be carefully inserted into the tweezers.
3. After reaching the prescribed time, remove the soft tissue needle from the disinfectant solution, rinse and dry.
Package : 1 Pcs/Bag
FDA Statement:
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.