37% Phosphoric Acid Etching Gel：：
1. Enamel and dentin etching.
2. Apply special technology to obtain ideal density of the gel.
3. Gel in blue color for better visual management
Indication: It is used for acid etching of tooth enamel and dentin before dental repair
Operation Procedure：
1. Remove surface dirt, rinse the prepared cavities, and blow dry.
2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation.
3. Rinse with clean water after acid etching, and suck out in time.
4. Use adhesives and resins for bonding repair.
Bonding Adhesive：
Visible light curing is a resin adhesive for dentin enamel 5ml.
This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials.
Scope of application：
Used for bonding dentine and enamel with resin and ceramic materials.
Clinical operation steps:
1. Pretreatment of caries and pulp protection.
2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun.
3. Apply a layer of adhesive evenly on the tooth surface with a small brush.
4. Make the adhesive layer even as far as possible with the wind power of the air gun.
5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive.
6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes.
Precautions：
1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin.
2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive.
3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material.
4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities.
5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it.
Environment：
This product is operated at room temperature.
Storage Conditions：
This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight.
Shelf Life：
This product is valid for 2 years, please do not use expired product.
Contraindications:
Patients with a history of allergy to methacrylate resins are contraindicated.
Composite Resin Kit（Standard ）：
Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
Precautions:
A void eye and skin contact. Wear gloves when handing this material.
Precaution:
Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light.
This system is designed to be used at room temperature (20-25°C, 68-77°F)
Storage between 2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
Composite Resin Kit（Mini) ：
Warning: Primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
Precautions: Avoid eye and skin contact. Wear gloves when handling this material.
Precaution:Please follow manufacturer's directions on the handling, proper use and recommendations for eye protection, when using a curing light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive
Packing List:
1 x Adhesive paste Syringes(3.5g)
1 x Primer Bottle (3ml)
1 x Instruction Booklet
20 x Brushes
1.
This product is one kind of orthodontic direct bonding system resin
with aromatic bis dimethyl acrylate resin as its main material.
2.
As a new-type orthodontic direct bonding system, it is convenient to
use with little waste, easy to handle independently and has a favorable
clinical bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching
the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and
dry with clean air. If the enamel does not have a chalky appearance,
pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Bonding:
apply another thin layer of the paste to seal the edges, adjust the
bracket within 20 sec, give pressure for 5 to 10 secand remove the
excessive primer and paste after 40 to 60 sec; then do orthodontic
procedures followed 5-min curing.
Packaging Detail:
1*Bottle（10ml）Primer
3*Syringes（3.5g each）Paste
1*Syringes(2.5ml)Etchant Gel
35*Brushes
