|
Dental Curing
Light
Parameter：
Wavelength：440-480nm
Light power：5W
Intensity：800-1400mw/cm²
Battery：Li-on 800mAh
Input
voltage：AC100-240V, 50/60Hz 0.4A Max
Output
voltage：DC 5V/1.5A
Net Weight：155g
Mode
selection：P1, P2, P3
Solidification
time：1S,3S,5S,10S,15S,20S
Features:
·Produce
the maximum light intensity safely.
· A high
intensity of 1400 mW/cm2.
· Offers
extremely short curing times of no more than 3 seconds.
· Cordless,
highly portable and light weight (only 155g).
·
High-performance Li-ion battery technology.
· LED panel
conveniently indicates a countdown curing time.
· Battery
can be fully recharged in 90 minutes.
· Battery
with protection against over-voltage, over-current and short circuit.
· 3
versatile curing modes for every indications.
· Automatic
power off, low battery alert.
· Color :
White .
Operation conditions:
1. Storage
Condition: Temperature: +10℃+40℃
2. Humidity:
30%-75%
3. Atmospheric
pressure: 70KPa-106Kpa
4. Environment
Conditions: Not near from fire equipment or flammability material.
Packing list:
The
host *
1
Metal lamp
holder *1
The
silicone base *1
Power
adapter *1
Disposable
protective sleeve *1
Shade
plate *1
Product
specification *1
&
Features:
* Universal composite for anterior/posterior dentine
and enamel
* High radiopacity
* Fluoride release
* High strength (compressive strength>480MPa)
INDICATIONS FOR USE:
* Direct anterior and posterior restorations
* Compatible with glass ionomer resin material
* Cup buildup
* Core buildup
* Indirect anterior and posterior restorations
including inlays, onlays and veneers
Color Available: A1, A2,A3, A3.5, B1 and B2
If you need other shade, pls note us in your
order.Thanks in advance!
&
etching gel is a polymer thickened gel for use on
enamel and dentin.
This gel will effectively treat enamel and dentin,
producing the necessary microretentive surface for successful bonding. The
polymer thickener creates thixotropic properties, enhancing handling
characteristics. The etchant rinse away cleanly and quickly, leaving no
residue.
Packages: Refill: 5 ml/syringe, Instruction X1,
Indications:Treat dentin and enamel, Treating agent on
dental restorative material.
1. Isolate tooth and then prepare the cavity in a
conservative manner. clean the entire surface with a slurry of pumice and
water.
2. Apply etchant using a tip, a disposable syringe
tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds.
etching time should be monitored with a stopwatch. begin timing at the end of
application.
Option: place etchant enamel first, then proceed to
cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely
remover all traces of etchant.
4. Remove exces moisture from the tooth and proceed
with the applicaton of etching gel, waiting for 10 seconds, then rise
thoroughly. then apply adhesive
&
Description:
1. 5th generation adhesive for all
classes of direct restoration.
2. Post and core bonding.
3. Ceramic veneer/crown/inlay and other
indirect restoration bondings.
Advantages:
1. High bonding strength and long
lasting durability.
2. Easy infiltrate to dentin
tubules.Reduce the risk of post-operative sensitivity.
3. Compatible with all light cure
restoratives.
4. Time saving and easy to use.
Usage:
1. Enamel bonding :30 seconds DX.Etch37
etch on enamel then apply 5th generation adhesive.
2. Dentin bonding:15 seconds DX.Etch37
etch on dentin then apply 5th generation adhesive.
Package:5ml/Bottle
|
