Dental Metal 1cure iLED Max Curing Light Lamp 1 Second 3000mw/cm2 Metal Head
Technical specifications
Dimensions: 25mm×25mm×240mm.
Net weight: 278g.
Applied parts of the equipment: Top of main unit, Point cure lens
Duty cycle of the equipment: 20 Sec on/20 Sec off
The components of machine(Packing list):
1.Maint unit *1
2.Top of main unit *1
3.Light hood *1
4.Bathymeter *1
5.Adapter *1
6.Charging base *1
7.Point cure lens *1
8.Disposable sleeve *100
9.Qualified certificate *1
10.Instruction manual *1
11. Warranty card *1
Power source
Power supply: rechargeable Lithium battery
Battery mode: 18500
Battery capacity: 2000mAh
Battery has protection against Over-voltage, over-current and short circuit.
Adapter(charge)
Input: 100-240V~ 50/60Hz 0.4A Max.
Output: 5.0V 1A
The adapter must be complies with IEC 60601-1 and IEC 60601-1-2.
Light source:
10W high power blue light LED
Checking method: the LED light is fine when the light is on during operating correctly.
The wave length of this product can match with the clinical dental resin solidification,
such as 3M, Dentsply etc.
Wave length: 385nm-515nm
Light intensity: 1000-3000mW/cm2
Working condition
Environment temperature: +5℃ to +40℃
Relative humidity: 30%~75%
Atmosphere pressure: 70kPa to106kPa
Equipment safety
Operating mode: intermittent operation
Protection type against electrical shock: class Ⅱ.
Protection degree against electrical shock: type B.
Protection against harmful ingress of water or particular matter: ordinary equipment (IPX0).
Safety in the presence of flammable anesthetic mixture with air, oxygen or nitrous oxide:
not suitable under this condition.
- Statement (FDA)
- The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.