The Davidson Action Wrench is made of 12L14 mild steel and zinc plated. Designed to fit the Remington 700 action, it emulates the bolt lugs and has two grooves cut to allow for the bolt release and fits both right and left hand actions. A 3/4" hex is machined on the end for a standard wrench or socket wrench. The hex end is also machined to help clear a stock with a high comb. It's overall length is 8.5" and the portion that enters the action is 7" long.
This wrench will fit other actions that have the same bolt lug dimensions as the Remington 700. See the pictures above and measure your bolt lugs. If yours are smaller, then it won't fit. We make our wrenches .984" diameter x .435" thick.
This wrench is not warrantied when a cheater bar is used.
The Davidson Barrel Vise is made of 2024-T3511 aluminum, hardened steel studs and Grade 8 nuts and washers. This barrel vise is designed for benchrest, silhouette, match and other competition rifles. Although it is very durable, it is not designed for factory tightened barrels that have never been removed. A packet of anti-seize compound is included for use between the studs and nuts.
The Davidson Barrel Vise will accommodate barrels from .775" diameter up to 1.25" diameter and tapers up to .3" per side per foot.
It has two 3/8" diameter mounting holes.