Skip to content
$150.0
Guaranteed Minimum Power: 450W (per channel) @ 4 ohms / 330W (per channel) @ 8 ohms / 900W bridge mono @ 8 ohmsFrequency Response (at 1 watt): 20Hz - 20kHz, +0/-1dBTotal Harmonic Distortion (THD): < 0.5%, 20Hz - 20kHzIntermodulation Distortion (IMD) 60Hz and 7kHz at 4:1, from full rated outputto “30 dB: 0.35%Slew Rate: >10V/usVoltage Gain: 29dB 31dB 33dB 36dBDamping Factor (8), 10Hz - 400Hz > 200Signal-to-Noise Ratio: (below rated power, 20Hz to 20kHz, A-weighted): > 100dBCrosstalk (below rated power)At 1kHz: “75dBAt 20kHz: “59dBInput Sensitivity for full rated power at 8Ohm: 0.775V or 1.4VInput Impedance (nominal)Balanced: 20Kï“Unbalanced: 10Kï“Connectors, Controls and IndicatorsInput Connectors: One balanced XLR and one unbalanced RCA per channelOutput Connectors: (Speaker Connectors) 4-POLE Speakon® and one pair Binding Post per channelFront Panel Controls: Power on/off switch, one gain control per channelRear Panel Controls Output mode switch: stereo (dual), parallel or bridgeInput sensitivity switch: 0.775V or 1.4VPower Indicator: One blue LEDSignal Indicator: One green LED per channelClip (peak) Indicator: One yellow LED per channelFault Indicator: One red LED per channelConstruction- Protection: Protection against short circuits, no-load, on/off muting,
- RF interference. Stable into reactive or mismatched loads
- Ventilation: Flow-through ventilation from front to back
- Cooling: Internal heat sinks with forced air. Fan cooled,
- speed regulated, thermal protection