These swivel hoist rings are used in very good condition. Some units have some minor tool marks; surface rust is minimal. All units are marked and/or etched with asset numbers. Threads have been cleaned and deburred, nuts turn easily by hand.
Buyer is responsible to confirm item is suitable for any intended use or application.
Price listed is for ONE of the items shown in the photos.
PRODUCT DESCRIPTION
All components are alloy steel, Quenched and Tempered
Rated at 100% at 90º angle
Individually proof-tested to 2-1/2 times the
Working Load Limit with certification and Statistically Magnetic Particle inspected
Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles
Marked with a Product Identification Code (PIC) for traceability, top washer is marked with Working Load Limit and recommended torque value
360º swivel and 180º pivot action
Satisfies ASME B30.26 requirements
SPECIFICATIONS
MPN: 1016957
Model: HR-125UNC
Size: 7/8"-9
Frame Size: 3
Type: Standard
Material: Alloy Steel
Finish: Zinc-Plated
WLL (lbs): 8,000
Safety Factor: 5:1
Thread Type: UNC
Thread Projection: approximately 4"
Solgottago #72