Creality SpacePi X4 Filament Dryer 4 Spools Filament Dryer Box Up to 85℃ 200W
About this item
- Dry 4 Spools at Once: Dry and print at once for maximum efficiency Effortless multi-color printing, seamless multi-filament drying.
- 200W + 200W PTC Heats Up to 85°C: The dual 200W PTC heaters, paired with insulated chambers, significantly improve heating efficiency, allowing temperatures to reach up to 85°C. This ensures continuous and effective drying of engineering filaments such as PA, PAHT, PC.
- Dual Chambers Independent Temperature Control: Each chamber is equipped with an independent PTC heater, allowing simultaneous drying of two filament types at different temperatures in one machine.
- Flexible and Energy-Efficient Drying: You can choose between single or dual chamber modes for energy-efficient drying. Single-chamber operation saves up to 40% energy, it's eco-friendly and cost-effective.
- SpaceDry 4.0 One-stop Drying Solution :The SpaceDry 4.0 achieves the perfect balance between efficient dehumidification and energy-saving drying. Its dual-chamber design significantly reduces energy consumption while integrating efficient heating, desiccant regeneration, and active dehumidification to improve drying/storage capabilities
- 360° Hot Air Circulation: The 360° surrounding hot air circulation ensures efficient heating and consistent temperature, allowing for uniform drying of filaments inside thechamber.
- Desiccant Regeneration: The desiccant chamber connects to the heating airflow, regenerating the desiccant automatically with each use.No replacement needed, providing a hassle-free and efficient drying process.
- Active Dehumidification: Dual dehumidifying fans actively expel moisture during drying, no manual dehumidification.
- Triple Safety Protection: Intelligent self-checking for early detection of issues, ensuring safe and worry-free drying.
- Wide Compatibility: Large size for 1kg/2kg spools. Works perfectly with all standard filament diameters 1.75/2.85mm
1. What types of filaments can SpacePi X4 dry?
SpacePi X4 supports drying common filaments like PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, TPU, and their variations. For best results, follow the drying temperature recommended by the filament manufacturer. Filaments requiring drying temperatures up to 85°C can be dried efficiently. Those needing higher temperatures can still be dried, but with longer drying times.
2. Can I use 3kg or 5kg spools?
As long as the spool diameter is ≤200mm, width ≤150mm, and filament diameter is 1.75mm or 2.85mm.
3. Can I dry filament while printing?
We recommend drying the filament thoroughly before printing. Drying time varies by material—refer to the user manual or the manufacturer’s guidelines. Once dried, you can feed the filament to your printer using a 4mm PTFE tube.
4. Can I use CFS and SpacePi X4 together?
We suggest drying filament fully in SpacePi X4 before transferring it to CFS for printing. While CFS is in use, you can pre-dry and store the next batch in SpacePi X4, improving workflow efficiency without occupying CFS resources.
5. Can I store filament in SpacePi X4 when it’s not drying?
Absolutely! SpacePi X4 functions as a sealed storage unit, keeping filaments dry even when not actively heating. Its airtight design and built-in desiccant help maintain low humidity for long-term filament protection.
