C3 Corvette 1969-72 Electric  Wiper Door Actuator Kit- car with Factory AC

                                                                                                                  Click to see 68 kit

“Don’t be the best in the world at what you do: be the only one”

                                                 Jerry Garcia

 Finally- an electric wiper door conversion using a complete new design.

Not just another copycat

Why use 20+year old technology when modernizing your car?

An actuator that is over a foot long- and takes a half day to open?

Cut up the firewall for them to "work"

Not with my kit!!!

                                                                                             

-Brand new AC Delco motor - used on millions of Crossover/SUVs for the rear wiper. These are small - heavy duty- very efficient and no electrical internal parts to fail.

-Super smooth operation-and at the right speed- Watch the YouTube Video below

-Two nuts for the bracket- the linkage does not need to be taken apart- screws right into OEM coupler. Adjust the linkage and that's all that is required

-Plug and play electrically-no wires to run to the wiper switch-no disassembly of the dash- running wires to the interior-simply plug in at the wiper motor connect power & ground

-Absolutely no modification required (except 68) to the firewall/actuator assembly. Only simple hand tools required for installation -included is a special tool to make the installation even easier

-Motor tucks toward the front fender of the car so there is no interference-  No external electronics- uses a standard Bosch relay.

-Works correctly- just like the factory- turn on the wipers- the door goes up- turn off the wipers- it goes down.

-To service - clean or in case of an emergency -you can manually open the door by removing the heim joint ( see video)- nothing to unbolt

-Motor - Brackets - wires - harness all made in the USA- and it's all assembled by me in the USA!!! 

-Others claim to be the easiest to install- this one truly is. Fits with no mods- Factory AC Big - small blocks

Will work with FACTORY AIR cars

-AC Delco motor-Brand new- with a  powdercoated gloss black cover

-Bracket- 3/16“ thick one piece 5052 Aluminum powdercoated gloss black

-Stainless Steel hardware -Billet 6060 Aluminum arms

-Bosch Relay and Hella socket - Delphi Waterproof Fuse Holder

-Waterproof roller switch mounted on a Stainless steel bracket

-USA made copper wire- "SXL"designed for underhood use to 250ºF

-Tubing covered -no split loom -electrical tape or connectors

- Pin removal tool for Packard 56 connectors

- Detailed installation Guide

            Everything you need is included

2 year warranty

Installation Guide

Comments from happy customers-

Thanks again for providing an affordable solution where the functionality far outweighs the cost!...................Jeffery T

Here's a video of them in operation-