Cooling Components CCI-1780 Electric Fan, 1958-70 Fits Buick

At one time or another we all have had a car overheat. The Ultimate Cooling Machine fan/shroud combos are just the ticket to avoid having it happen again. These 2500 CFM pull-type fans measure 2-5/8" deep at the motor, 2-3/8" at the mounting brackets and 1-1/2" at the high impact shroud.

• 26.00" wide x 19.00" high
• Can be easily reduced in size to 23-1/4" wide x 18-1/2" high
• 12 volt operation
• Lower engine operating temperatures
• Saves horsepower
• Better fuel mileage
• Constructed of high-impact ABS material
• Requires the use of a 70 amp or larger relay
• Relay and fan control sold separately

Learn more about the importance of using a fan shroud in our tech article, .

IMPORTANT:

All warranties and returns must be directed to Cooling Components, LLC as noted in the manufacturer's return policy found here:

Due to the manufacturer's policy, fans MAY NOT be returned to Speedway Motors and MUST be returned to Cooling Components, LLC in order to receive full credit.

(PDF)

(GIF)

(PDF)

1. This fan has two speeds. It has two positive wires going to the motor, one is gray and one is white. If both recieve 12 volts, the fan will be on high speed. If only one recieves 12 volts, the fan will be on low speed. The black wire is ground.
2. These fans draw 60+ amps on initial startup and have an operating amperage draw of 16-22 amps. Due to the high amperage these fans pull on initial startup, we highly recommend using 70 amp fan relays 910-51000 or 910-50051.

*Relay and fan control sold seperately.