CLUTCHXPERTS STAGE 3 PHASE CLUTCH KIT+FLYWHEEL fits 04-17 SUBARU WRX STi TURBO

$303.45
Brand
ClutchXperts
Type
Clutch Kit & Flywheel Bundle Kit
Fitment Type
Direct Replacement
Disc Diameter
9.45 in (240 mm)
Manufacturer Part Number
CXP-55015HP3-PH3+JDM CXP-55015CFW-3PH-JDM
OE/OEM Part Number
FJK1000 FF501 110661 15803 15030-2100 SB10-HDSS, FF501A 110720
Number of Teeth
124 Ring Gear Teeth
Input Spline Quantity
24
Disc Material
Ceramic-Miba
Country/Region of Manufacture
United States
Manufacturer Warranty
3 Months
Performance Part
Yes
Vintage Part
No
Input Shaft Diameter
1 inch
Interchange Part Number
FJK1000 FF501 110661 15803 15030-2100 SB10-HDSS FF501A 110720
Plate Diameter
9.45 in (240 mm)
Warranty
Yes
Surface Finish
CAST IRON, 6-PUCK COPPER CERAMIC, CHROMOLY
Pressure Plate Type
Heavy Duty Pull-Type Diaphragm
Torque
389 lb-ft
Horse Power
359 HP
Clutch Material
Copper-Ceramic Miba
Clutch Disc Style
High Torque 6-Puck Sprung Hub Disc
Transmission Type
6 Speed Manual
Type of Transmissions
Manual Transmission
Returns Accepted
Returns Accepted
Item Diameter
9.45 in (240 mm)
Flywheel Material
4140 Chromium-Molybdenum Forged Steel
Note
PULL-TYPE Clutch Kit For WRX Sti
condition
New

ClutchXperts STAGE 3 PHASE CLUTCH KIT+FLYWHEEL fits 04-17 SUBARU WRX STi TURBO

Description

ClutchXperts Stage 3 Copper Ceramic Racing Clutch Kit is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6 Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. ClutchXperts Stage 3 6 Puck Miba Ceramic Racing Disc. A Miba buttons are ULTRA QUALITY Material For Friction Material In The Clutch Market.

If you want the best the industry has to offer, ask for ClutchXperts 6 Puck Sprung Copper Ceramic Racing Disc. The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!.

**The throwout bearing and pilot bearing (if required) included ($80 value) for free!

Features of ClutchXperts Stage 3 Copper-Ceramic Racing Clutch System

1. Heavy Duty Stage 3 Heavy duty racing pressure plate
2. Hi-Leverage Design
3. Precision heat treated single diaphragm
4. Re-Arched Diaphragm for Superior Engagement
5. High clamping force
6. NO unnecessary increase in pedal pressure
7. 6-Wings Ceramic Button Disc
8. More Grip Power, longer lasting
(Individual components available upon request)

FLYWHEEL:

Our ClutchXperts lightweight flywheel is an ideal performance modification because it has no disadvantages. There are significant benefits of having a lightweight flywheel. Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to the less rotational mass at the crank. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car.

Using a lightweight, ClutchXperts lightweight flywheel is a race proven way to improve the performance of any street or race car. Lightweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life.

If you see prices way less than others than competitors that means what you get is what you pay for Made where country with low labor with low craftsmanship with poor materials.

COMPONENTS:

  • ClutchXperts STAGE 3 PHASE 2500LBS CLAMPING LOAD PRESSURE PLATE (PULL TYPE)
  • ClutchXperts STAGE 3 PHASE 6 PUCK COPPER CERAMIC MIBA BUTTON RACING DISC WITH SPRING SPRUNG
  • THROWOUT RELEASE BEARING
  • PILOT BEARING
  • ALIGNMENT TOOL
  • ClutchXperts CHROMOLY 15LBS LIGHTWEIGHT RACING FLYWHEEL

APPLICATION:

  • fits 2004 - 2017 Subaru Impreza WRX STi (2.5L DOHC Turbo EJ257; 6 speed)

ITEM SPECIFICATIONS:

  • Brand : ClutchXperts
  • Manufacture Part Number : CXP-55015HP3-PH3+JDM CXP-55015CFW-3PH-JDM
  • Surface Finish : CAST IRON, COPPER CERAMIC MIBA CHROMOLY
  • Torque : 389 ft-lb
  • Horse Power : 359 Hp
  • Warranty : YES
  • Country of Manufacture : USA

**FILE PICTURES ARE FOR REFERENCE ONLY. ACTUAL ITEM MAY VARY

Image Gallery

STOCK PHOTO

    • RMA # : Message us through eBay for RMA#.
      We do not allow any return without RMA#.
    • Return Shipping : Buyer is responsible for return shipping cost.
    • Exchange : Up to 30days from of purchase (Brand new condition, no restocking fee).
    • Return :
      • All returns will be subject to 20% restocking fee.
      • Return your purchase for up to 30 days from date of purchase for a refund.
      • Must be in brand new, resalable condition.
    • Damaged Item : Message us through eBay.
    • Manufacturer Warranty : 3 months or 3,000 miles(whichever comes first) from the date of purchase.
  • ClutchXperts, Inc.

    We are located in Southern California

    Please contact us through eBay messages by clicking on "Ask a Question".

    Business Hours : 9AM - 5PM Mon-Fri (Pacific Standard Time).