You are buying 1 (ONE) NEW 3 1/2" DIAMETER by A NOMINAL 12" (11 7/8") LONG SECTION
of CLEAR EXTRUDED ACRYLIC TUBE.(Actual dimensions are Three and one half inch outside diameter by 11 7/8" inch long)
THIS IS CUT FROM A NEW 6 FOOT LONG LENGTH OF TUBE.
THE SAW BLADE IS 1/8" THICK. THEREFORE 1/8" OF MATERIAL IS LOST DURING THE CUTTING PROCESS.
These tubes have a 1/8" thick wall which provides an outside dimension (OD) of 3 1/2" and an inside dimension (ID) of 3 1/4".
The picture shows several various size tubes for representation of our product but you are buying and will receive ONE 3.5" OD x 12" (11 7/8") long tube.
To assure that you get the finest quality, the protective sleeve is kept in place on the rods while being cut to protect the acrylic.
All rods have saw cut edges on both ends. Saw cutting can cause micro chips on the ends of the rod as seen in the pictures.
Please allow a length tolerance of +/- 1/16" on all pieces and a 0.025" diameter tolerance.