Lots sold ! This quality Aluminium box is to house a (Chinese 5 kw heater as picture) under the chassis of a camper van length 420 x 190 high x 170 deep , 1.5mm thk with holes for clamping plates at 195 centre's . Access plate provided ie door x3 clamp plates ally Riv nuts installed in the box BZP bolts & washers included . Front view the air in hole 81.5 dia to the right and outlet hole is 81.5 dia to the left, for the Chinese 5 kw, any queries plz message me.

The box is fitted to the floor of the van using the x3 clamps provided, and the heater is secured inside the box.

This package includes:-
1.5mm Aluminium folded box
Aluminium Access plate (door)
8 x M4 BZP screws and spring washers
3x aluminium fixing clamps
6 x M6 BZP nuts bolts washers &
grommet

F.Y.I
You can bolt to the floor using the clamps, attach to the chassis, or anywhere you deem fit to install the heater box. These boxes have been fitted to all different types of campers.
The box provided as a place for the heater to live outside the van, saving you space and adding a bit of security and protection + noise reduction being outside the van.

Always refer to the heater supplier manual for correct installation information.

Tip 1:

The pictures show a 5kw heater in my other stainless steel box with a plastic vent for air in. This comes with your heater (not supplied by me). These can be drilled and bolted to the box if required for an easy ducting connection.

Tip 2: Make sure the glow plug is always at the top of the fuel input to prevent any leakage, and if in doubt, plenty of videos are available on this.

Tip 3, Once fully installed, maybe use a bit of Loctite on the access door screws to prevent any loosening overtime.
Tip 4, Maybe use sealant inside the box on the flanged joints for any possible water ingress as a extra precaution.

Chinese 5 kw Aluminium diesel BUDGET heater box