PICTURE
            DESCRIPTION
Advantages: 【Spring Steel Design】High grade spring steel frame ensures better
overall balance of tool holder assembly. Durable and long lasting.
Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill
Holders Size: 1/4", 3/8",1/2", 5/8", 7/8", 1"; Both ER32 and ER16 Chuck
Gage or projection length is 2.75"; 1pcs Precision Keyless Drill Chuck
1/2 Capacity; 1pcs Face Mill Cutter with 2" cutting diameter. This product includes the following parts: 6PC CAT40 End Mill Holder: Projection Length: 2.5" 6PC Common Size: 1/4", 3/8", 1/2", 5/8", 7/8", 1" Precision high speed end mill holder for durability and rigidity Holder balanced for accuracy Provides a very close tolerance fit with minimum runout between the tool holder's bore and the cutting tool Thru Hole of the tool holder allows the use of Thru Coolant Tools when used with a Thru Coolant retention knob 3PC CAT40 ER32 Chuck 2PC CAT40 ER16 Chuck Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in Accuracy in Tenth Fully ground flange and V-groove — easy on tool changers for less spindle and changer maintenance V-Flange CAT 40 is production balanced to high speed spindle turning and meet standard industrial needs High Speed True Balance in 15-20K RPM Even though all sellers are saying balance, but it's not true, few smart guy copy few words from seller A, and another words from seller B to make up their description or over describe the item. It's easy to find out balance or not, set spindle speed higher, and you'll see the difference, could be couple thousands, true balanced holder works the same way at low and high speed even up 20K RPM, however, poor or not evenly balanced only works normally under low spindle speed. Hardened and ground to ensure maximum accuracy. Through spindle coolant capability from pull stud to collets 1PC Precision Keyless Drill Chuck: Keyless Drill Chuck 1/2 Capacity Drill chuck has very strong holding power. All Jaws are Hardened V-Flange CAT 40 is production balanced and meet standard industrial needs 1PC Face Mill Cutter: 2in cutting diameter5PC general purpose carbide inserts,it's a combination of a tough, special cemented carbide substrate and CVD coated grade for milling of steel up to 30-35 HRC before heat treat. 12PC ER32 Collets Set By 1/16 Made of high grade spring steel Ground roughness is Ra0.4 Microns, plus overall fine polish 12PC set by 16th: 1/8"; 3/16"; 7/32", 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 11/16"; 3/4". T.I.R.: 0.0003" or 5um. In order to make all collets running true, on your side, make sure your machine spindle and chuck holder running true, on my side, I'll make sure all those collets running in tenth. Special angled slots increase rigidity Better overall balance of tool holder assembly Protects tool holder from contaminants Use with any standard ER collet chucks for coolant-thru tool applications. 10PC ER16 Collets by 1/32 Made of high grade spring steel 10PC Size: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8" T.I.R.: 0.0003" or 5um. In order to make all collets running true, on your side, make sure your machine spindle and chuck holder running true, on my side, I'll make sure all those collets running in tenth. Special angled slots increase rigidity Better overall balance of tool holder assembly specifications
Parameter
IN THE BOX
feature
MORE INFORMATION
SHIPPING1. We have Two warehouses located in CA, and NJ, and the item will be shipped from one of them, and only to eBay ADDRESS. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, pls inform us by Email or leave ebay note if the changes are needed before we send the product. 2. It is beyond our ability to change the address after we ship your item. 3. Orders placed at weekend will be shipped within 2 days. 4. USPS: 3-9 business days. | UPS: 2-6 business days. | FedEx: 2-6 business days. 5. We only ship to the 48 states, and we do not ship to FPO or APO addresses. RETURNWe accept returns. Please contact our customer service team immediately if: 1.You changed your mind and wish to request a return 2.Your product was damaged during transit All returns must be directed through Customer Service. Please do not return or post items before obtaining instructions from us. If you do, there is a risk that your returned item may not be identifiable and accepted. Applicable freight fees and a 10% re-stocking fee will be deducted from your refund in cases where you changed your mind about your purchase and wish to return the product. This also applies to orders cancelled while in transit. We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. The buyer will be liable for the shipping costs associated with warranty claim. |
100%
American
Buy
with confidence
Fast
Delivery
Service
& Support
