US Stock, CALCA 13in x 65.6ft DTF Silver Foil Film Roll,Cold Peel
Impress and excite your customers by printing on CALCA DTF Gold Metallic Foils. Printing on our foil is easy and fun.
Bulk Order/ Bundle Order:
1. Agents and Distributor with the best price in the market.
2. If you have a need in large quantities or in a regular basis, please contact us, we will provide you with more incredible price.
2. If you have a need in large quantities or in a regular basis, please contact us, we will provide you with more incredible price.
One Stop Solution for DTF Priting, Screen Printing, Sublimation Heat Transfer
Professional Seller, Showroom in Rancho Cucamonga, CA, USA
California pickup, can get 50% discount for your first order within $500.
Description:
√ Print your image using CALCA white ink onto the foil
√ Apply CALCA TPU powder – shake excess powder off – place in oven until TPU is appropriately melted.
√ Choose your garment or fabric and place it on your heat press (temperatures and pressures may vary dependent on your fabric type) and press the printed foil with the image side facing down between 6 to 8 seconds.
√ We recommend waiting for the foil to completely cool down before peeling.
√ And then in a very quick motion, rip the foil off the fabric from side to side.
√ We suggest using a lint roller to remove any excess foil that may be left on the fabric.
√ A 2nd 5 sec. press is sometimes recommended
√ You will love the finish look.
Specifications:
- Size: 13in x 65.6ft / 33cm x 20m
- Print side: Front side for printing, metal side non-printable.
- Press time: 8-10 sec at 284-302 ℉(140-150℃).
- Print your image using CALCA white ink onto the foil,ink volume adjust to 70-80%,CMYK ink not needed.
- Inner core: 2.95in / 7.5cm
- Cold Peel
Tips:
Pressing twice for better results and water resistance.
The first time:10s at 284℉(140℃).
The second time:after peel,press again,10s at 284℉(140℃).
Package:
Packing Size: 13.8in x 4.3in x 4.3in/35cm x 11cm x 11cm
Gross Weight: 4.4lbs /2kg
On Mar 19, 2025 at 03:51:53 PDT, seller added the following information: