FDA 510(k) Number:K230487
CE Report No.:M.2024.MDR.
Reserve cheaper inventory for the future! Purchase over 10pcs, including 10pcs upgrade for better logistics, and it will take 3 working days to arrive at the door!(Free upgrade to DHL/UPS/Fedex)
Packing: 10pcs/box
Translucency/Color:
HT--A1,A2,A3,A3.5,A4,B1,B2,B3,B4,C1,C2,C3,C4,D2,D3,D4,BL1,BL2,BL3,BL4
LT--A1,A2,A3,A3.5,A4,B1,B2,B3,B4,C1,C2,C3,C4,D2,D3,D4,BL1,BL2,BL3,BL4
MT--A1,A2,A3,B1,BL1,BL2,BL3,BL4
Features:
- 99.9% extra pure, bio-grade raw materials from natural minerals
- Melted in self-developed plantinum system at up to 1700℃
- One-step forming technology, elminating surface defects
- Optical grade precise heat-treatment for nucleation and crystalizatiol
- Fluorescence and opalescence that minic real teeth appearance
Indications:- Inlay
- Onlay
- Veneer
- Partial crown
- Anterior crown
- Posterior crown
Technical Specifications:
Density: 2.49g/cm³
Thermal Expansion(25-500°C)：11.4x10-6/K
Linear shrinkage rate: 0.25%
Vickers Hardness: 615Hv
Elastic Modulus: 75GPa
Flexural Strength: 420MPa
Fracture toughness: 2.0MPa.m-1/2
Firing Instruction:
Total processing time: approximately 22 minutes. Preheat the sintering furnace to 403℃ and place the restoration inside. Close the lid slowly, allowing at least 2 minutes for surface moisture to evaporate.Heat from 403℃ to 830℃ at a rate of 90/min, maintaining this temperature for 10 seconds.Continue heating to 850℃ at a rate of 30℃/min, maintaining this temperature for 7 minutes. Finally, cool down according to the equipment specifications and open the lid once the temperature reaches room temperature.
If you have more quantity requirements, please contact me:
Mobile number:+86176 3066 7922W/H/A/T/S/A/P/P:+86176 3066 7922W/H/A/T/S/A/P/P:+86159 6293 9376
Shipping
Packing Detail:Each block is packed by hard carton box Shipping way:DHL/UPS/FedEx/SpeedPAK Standard Shipping
Note：The sale of this item may be subject to regulation by federal and provincial regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
- 99.9% extra pure, bio-grade raw materials from natural minerals
- Melted in self-developed plantinum system at up to 1700℃
- One-step forming technology, elminating surface defects
- Optical grade precise heat-treatment for nucleation and crystalizatiol
- Fluorescence and opalescence that minic real teeth appearance
Indications:
- Inlay
- Onlay
- Veneer
- Partial crown
- Anterior crown
- Posterior crown
Thermal Expansion(25-500°C)：11.4x10-6/K
Linear shrinkage rate: 0.25%
Vickers Hardness: 615Hv
Elastic Modulus: 75GPa
Flexural Strength: 420MPa
Fracture toughness: 2.0MPa.m-1/2
If you have more quantity requirements, please contact me:
Mobile number:+86176 3066 7922
W/H/A/T/S/A/P/P:+86176 3066 7922
W/H/A/T/S/A/P/P:+86159 6293 9376
Shipping
Packing Detail:Each block is packed by hard carton box
Shipping way:DHL/UPS/FedEx/SpeedPAK Standard Shipping
Note：The sale of this item may be subject to regulation by federal and provincial regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.