I have personally rebuilt over 1,000 cylinders with my two hands (I stopped marking wall above shop table at 1000). I am in my late fifties and have been at this for a while. The reason I say this, is because, the "Power Team" brand is my favorite (Second place runner up is TITANIUM PRO). Power Team is the toughest, longest lasting, best performing, and easiest to rebuild that you can purchase, Period. If you are into what is the “last price” “Lowest price” “Disposable” chinese junk this is not for you. These cylinders are for the buyer who requires QUALITY – RELIABILITY – LONGEVITY – REBUILDABILITY. If you are replacing or including this into a project or product that you take pride in keep reading. If you yourself are producing or working with clients who demand and appreciate quality read on. We all know we get what we pay for! The cylinder says “Short Tons” which means a 2000 pound ton (long ton 2240 not American). The cylinder is rated at maximum output of 11.2 tons. Bear in mind that tonnage is reached when powered by hydraulic fluid at 10,000 PSI (700 Bar). NOTE: your pump or power unit can be powered / fed by air, electric or fossil fuels, however the oil output must be 10,000 to achieve max tonnage. The cylinder will work fine at lower PSI, however the tonnage will be lower. Each 1,000 PSI is almost same in Tonnage (Approx.) E.g. 2,000 = approx. 2.2 tons. NOTE: Your hydraulic hose supply must be “True Jack Hose” 10,000 PSI – 700 Bar with a minimum 2 – 1 safety factor so working pressure @ 10,000 and burst pressure would be at @ 20,000. 10 inch stroke |
- Power Team
- THREADED PISTON ROD END AND BASE THREADS ACCOMMODATE ACCESSORIES AND ADAPTERS.
- Threaded cylinder collars; piston rod ends; and internal base threads simplify mounting.
- A 9796 3/8 NPTF female half coupler is standard with each cylinder; oil port threads are 3/8" NPTF.
- Order No. : C1010CBT
- Cyl. Cap. (tons) : 10
- Stroke (in.) : 10 1/8
- Oil Cap. (cu. in.) : 22.9
- Bore Dia. (in.) : 1 11/16
- Cyl. Eff. Area (sq. in.): 2.236
- Internal Press at Cap. (psi): 8;948
- Tons at 10000 (psi) : 11.2
- Weight (lbs.) : 13.9
- Re- tracted Height (in.): 15 1/2
- Ex- tended Height (in.): 25 5/8
- Outside Dia. (in.) : 21/4
- Collar Thread (in.) : 2 1/414
- Collar Thread Length (in.): 1 1/8
- Base to Port (in.): 1 11/16
- Piston Rod Dia. (in.): 1 1/2
- Piston Rod Protrusion (in.): 1 1/16
- Piston Rod Thread (NPT): 1 1/411 1/2
- Internal Base Thread (NPSM) (in.): 1 1/411 1/2