【Buy 7 PAY 4】SUNLU PLA+ (PLA Plus) 3D Printer Filament 1.75mm 1KG Neatly Wound

Slide
$22.95
Color
Black
Country/Region of Manufacture
China
Filament Diameter
1.75 mm
Material
PLA+
Type
Filament
Compatible Model
For 3D Systems CubePro, For 3D Systems ProJet 1200, For Airwolf 3D AXIOM, For Airwolf 3D AXIOM Dual Extruder, For Airwolf 3D AXIOMe, For Anet A8
Brand
SUNLU
Manufacturer Warranty
1 Year
Unit Quantity
1
Unit Type
Unit
condition
New

About this item

  • ➽【Toughness plus = SUNLU PLA plus, Say No to Brittle 】SUNLU PLA plus no as brittle as normal PLA. Better toughness, brighter color, higher strength；lower shrinkage, lower warping; SUNLU PLA plus filament more easier to print, and odorless, making good print results.
  • ➽【1.75mm 1KG Pack Vacuum Pack PLA + Filament】 1kg spool 1.75mm filament PLA in vacuum packing. SUNLU 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • ➽【Good Layer Adhesion and No Plugging 3D Printing Material 】Better flow of SUNLU no plugging premium 1.75mm PLA+ filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free. No impurities, no clogged.
  • ➽【High Precision +/- 0.02mm Tolerance】: 1.75mm PLA+ 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy.
  • ➽【High Compatiblity &100% Enviromental Material】: Compatible with 99% FDM 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, Delta, Mbot, Type A, 3D PEN(3doodler pen). Environmental protection, made from starch raw materials derived from renewable plant resources.
    • Brand: SUNLU
    • Net weight: 1kg
    • Print temp: 210°C - 250°C 
    • Hot bed temp: 55°C - 70°C
    • Print speed: 20-100mm /s
    • Packaging Included: 1 × spool of PLA + filaments

 

SUNLU PLA 3D Printer Filament

SUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing.

It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces. 

FDM 3D Printer Material

SUNLU PLA PLUS filament is easier to print and it's odorless, which gives you good printing results. And all our 3D printer filaments are vacuumed sealed along with a desiccant pack.

Starch Raw Materials

SUNLU PLA PLUS 1.75 mm 3D filament is made of starch raw materials obtained from renewable plant resources such as corn.

Good Versatility

SUNLU 1.75 mm 3D PLA PLUS filament is compatible with popular 1.75mm FDM 3D printers,which help you DIY your imagination.

 

 
 
PushAuction

On Aug 2, 2023 at 20:29:44 PDT, seller added the following information:

DataCaciques