Fitment
4th Gen 2010-2019 RAM 2500/3500/4500
(NOT FIT Power Wagon due to factory winch placement)
Specifications
32” 180W Curved LED Light Bar
>>LED power: 180 W (60pcs 3W high intensity LEDS)
>>Working Voltage: DC 9-30V(fit 12V/24V vehicle)
>>Beam type: Spot beam &Flood Beam Combo
>>LED color temperature: 6000K
>>Lumen:13200LM
>>Working life: 30000 hours
>>Working temperature: -40-85 degree Celsius
>>Waterproof rate: IP67
>>Material: 6063 Aluminum Alloy Profile,High quality Led Chips,high transmission PC Lens
>>Product Dimension: 32*2.2*2.9in
Light Mount bracket
Easy to install,No cutting and drilling need.
This kit allow RAM truck owner to install a 32" Curved/Straight Light Bar into your factory bumper.
Come with tow hook(Over 30,000 pounds pull capacity) to replace your factory hook.
Made of heavy duty steel with power coated black surface.
D Ring Shackles
Industry Standard 3/4" Bow Shackle with a 7/8" Diameter Pin will fit most vehicles
4.75 Ton (10472 lbs) Break Capacity will handle Towing or Recovery job and Break Strength Reaches Up To 19 Ton (41887 lbs)
No drlling or cutting to install.
designed for tow goods、rescue and tie down，compatible with SUVs, UTV, ATV，Jeeps, trucks.
Accurate measurement and design ensure a perfect fit.
Made of solid steel with powder coated black surface to protect
include silicone isolators for bumper protection 、rubber washers for a perfect fit and strength steel safety pin
Package Included
1x 32" Light Bar
1x Wiring Harness
2 x D Ring Shackles
8 x Rubber Washers
2 x Silicone isolators
2 x Forger Steel Safety Pin
2 x Light Mount bracket
Key Feature
* Long lifespan--Advanced LED chips, low light decay; Multilayer heat sinks, efficient cooling.
* Super Bright--Subversive spot & flood optic system,high density light spread makes dark night become daytime. Provide you the ultimate light pattern for offroad adventure.
* Multifunctional Useage-- for specialized vehicles, and other useage such as hunting, camping & outdoor lighting.
* High quality--Environmentally sealed silicone adhesive, effective waterproof IP67 and shockproof.
How to Install the Light Bar
1.Test the light to make sure it can work properly.
2. Install the hex nuts on the bolts, And twist the spring meson .
3. Make the bolts go through the mounting holes And set into the spring meson, And then tighten the hex nut.
4. Connect the power line to the corresponding power connector.
5. Make sure the light is installed steadily, And then start the power.
