A replacement brake microswitch for Brembo brake master cylinders fitted as original equipment buy the manufacturer. Not suitable for aftermarket Brembo RCS series master cylinders.
Please check the locating pin orientation before ordering. We suggest you compare our images with your original switch.
We sell two types, left and right.
This is the LEFT switch (pins up, switch on the left) and will fit Brembo master cylinders fitted as OEM buy the manufacturer such as Ducati, Triumph, KTM etc.
This will not fit any RCS series Brembo master cylinder. For that you will likely need our other switch (item 184538819112)
This is a alternative part to the discontinued Marquardt 1022 series switch originally used by Brembo.
Brembo themselves now supply an Omron switch adapted and moulded into the same housing pattern as the 1022.
This switch is an equivalent made to the same specifications but at a fraction of the £33 cost of the Brembo original replacement.
Please check the images for the pin orientation. What you see is what you are supplied with. Some Brembo original fitted equipment utilises the same switch but the pin orientation is opposite. This is same for the Brembo clutch switch to which this will not fit. You will need our other switch item number 184538819112.