*** LEFT HAND OPTION ***
If you need a LEFT hand grip, please message me after ordering. Ebay has a hard cap of the amount of variations active which I only do left hand orders if messaged ahead of time. Thanks for understanding.*** IMPORTANT - Bow Model Fitment ***
These grips have only been tested on the Gen 1 bows before the Griplock system released. I have NOT been able to test it on a griplock model yet. Because of this I will only assume that it fits the bow models that do not have the griplock system such as the following:
- Reckoning GEN 1
- SS34
- Revolt
- Realm
- SX80
- and others
What's included:
1) Grip - 1 grip in your choice of color and grip angle
2) Removal Tool - black only
Decided to make grips for the Bowtech models utilizing the clutch grip system. Angle options to help those who wanted to get a more natural wrist position which would translate to a steadier hold.
*** COLOR OPTIONS ***
Colors available are shown in the 2nd picture showing the color options. If you wanted a combination that is not active just message me.
*** INSTALLATION & REMOVAL ***
These use the clip system bowtech has integrated into the riser. These grips will snap into place using that same modular system. These will lock in pretty tight which I will include a removal tool. The removal tool you will slide between the small gap between the grip edge and the riser edge from the side. You will slide it in on the index finger side of the grip. Basically the only way I found to easily remove these grips is to pop off the bottom 2 to 3 clips at once. Once it is slid in the gap you will bend it back away from the grip and the 3 clips will unclip. You may need to use your fingers to help the grip not slip back in the grooves when releasing the removal tool. Use your finger on the top curve to release the clip and gently pry it off.
I made the grip gap to fit a standard gift card. So if the removal tool breaks you can use a old gift card as a replacement tool. These will only come in black no matter the grip color option chosen.