BEACON QUICK GRIP GLUE 2oz tube - clear, fast, waterproof flexible adhesive

• Quick grab, Quick dry.  Handle in just 10 minutes, full-strength cure in 24 hours. 
• Dries crystal clear - won't yellow!
• Bonds and repairs almost anything - wood, plastics, rubber, concrete, ceramics, fabrics, glass, leather, and much more.     
• Works Great on flexible EPP and EPO foam! (NOT for EPS or regular solid foam)
  
• Water and weather proof - fine for outdoor projects.
• Permanent, Flexible and Paintable when dry.
  
• Metal squeezable tube with a screw-on cap.
  
• Does not expand or "foam up" - won't bond to skin!
  
• Brand New/Fresh/Sealed tube on blister card.

This is a Solvent-based glue so always test on scrap materials first to ensure compatibility.  Can damage finished or painted surfaces - protect work areas to prevent damage.

Items must be clean, dry and free from oil and grease. Wiping hard items with alcohol first is a great idea.

Apply to only one surface. To speed up drying, pull glued surfaces apart a few times and reposition.

Dries fast, but allow bonded surfaces to dry 24 hours to develop full strength before using.

Roughen up smooth surfaces or shiny plastics will help increase adhesion. 

Clean shiny plastics with rubbing alcohol first for best results.

Avoid applying excessive glue; a small amount of Quick Grip will go a long way!

Quick Grip can be thinned and cleaned while wet with acetone (nail polish remover).

Use in a well-ventilated area and follow all safety suggestions. Keep away from fire, do NOT use while smoking. Keep away from Children.

Quick Grip is NOT for use on rigid foams; use Beacon’s FOAM-TAC glue instead.

Reseal the cap tightly and store in a cool, dry place. Avoid heat and direct sunlight.