Automotive EVAP Smoke Machine Leak Detector Tester Pipe System Vacuum Diagnostic

$68.99
Brand
FOXWELL
Model
FOXWELL SD201
Manufacturer Part Number
AS ANCEL S300 S3000 FOXWELL ST203 SD203 AUTOOL SDT203
OBD Interface
OBDII, EOBD, CAN, OBD
Supported System
Intake System Test, Car Sealing Test, Fuel Tank System Test, Exhaust System Test, Various Pipe Fittings Test.
Connectivity
OBD
Vehicle Type
Passenger Vehicle, Motorcycle, Heavy Duty/Commercial
Features
EVAP Smoke Machine
Type
EVAP Machine
Fit For
Cars, Motorcycles, Light Trucks, Speedboat,ATVs...
Material
Plastic
Color
Yellow
Accessories
Power Cord,Delivery Hose,Funnel,Intake Bladder
Weight
2240g
Country/Region of Manufacture
China
Functions 1
EVAP System Test,Vacuum Leaks Test
Functions 2
Intake System Test,Exhaust Systems Test
Functions 3
Fuel Tank System Test,Turbo Test
Functions 4
Cooling System,EGR System,Crankcase System
Features 1
Wide range of applications
Features 2
Built in air pump
Features 3
Overheat & Anti-frost protection
Test Liquid
Baby Oil (not include)
Output pressure
0.8-1.2 bar
Flow Rate
<6 L/min
Power source
12V Fully Charged vehicle battery
Size/Dimensions
3.45*4.66*6.46inch (L*W*H)
Accessories 2
Service Replacement,Adapter Cone,EVAP Adapter
Accessories 3
EVAP Removal Tool
condition
New

Do You Have Following Problems?

You will be able to Accurately detect the location of the leak, when you encounter the following situation.
-Frequent refilling oil/coolant
-Car dashboard lights up
-Smell something weird
-Engine running too hot

 

Foxwell SD201 Introduction:
FOXWELL SD201 is an entry-level pipeline leak detection tool. It can quickly and accurately locate leaks in any pipeline system, help technicians and automotive users quickly solve problems, and reduce diagnostic time.
 
 
Foxwell SD201 Main Selling Points:
1.   Small size,patented technology, quality and after-sales support
2.    Smoke is environmentally friendly and non-toxic
3.    Built-in control circuit board
4.    Built-in air pump
5.    0.8-1.2bar output
6.  Smoke Mode: the smoke mode can pinpoint exactly where the leak is happening.  
7.    Equipped with Liquid Level observation port
8.    Rich accessories
9.   Overheat & Anti-frost Protection
10. Wide Range of Applications: suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats. Supports all 12V vehicle batteries.
 

Support Multi-system Test

EVAP System Test
Intake System Test
Exhaust Systems Test
Crankcase system test
Car Sealing Test
Fuel Tank System Test
Turbo System Test
Various Pipe Fittings Test

More Features of SD201
 
Wide Range of Applications: 
suitable for detecting pipeline system leaks on cars, motorcycles, snowmobiles, beach bikes, light trucks, heavy-duty trucks, and speedboats. Supports all 12V vehicle batteries.
Overheat and Antifreeze Protection:
The smoke detector is equipped with the latest intelligent protection devices. When the temperature of the equipment exceeds 75 degrees Celsius, the power protection device will intelligently start and shut down to ensure the safety of the operator and equipment. If the device operates continuously for more than 15 minutes, it will be protected from overheating for a protection time greater than 10 minutes. This device is also suitable for low-temperature operation. Only car batteries with a full capacity of 12V are supported.
Built-in Air Pump: 
Engineered for ease, SD201 eliminates the need for external gas sources, offering swift setup and immediate functionality.  The built-in pump ensures efficient operation while enhancing portability, allowing you to effortlessly move the smoke tester automotive wherever it's needed.

How To Use It?

1. Inject 10ml-20ml of test oil into the smoke leak detector, filling 20ML of test fluid, under standard working conditions, can be used continuously for about 10 minutes; (about Smoke Oil: advise use the Baby oil)
2. Open the pipe that needs to be connected with the leak detector.
3. Install the airbag adapter into the sealed pipe and connect the device to the smoke conduit.
4. Connect the leak detector to the DC12V battery and the device will start working. NOTE: red clamp tp positive(+), and black clamp to negative(-)
5. The pipe will be filled with smoke and the leakage point will be checked.
6. Test the leaking pipeline, under the premise of sealing accurately, generally about 1 minute can be filled with smoke, if there is a leak, within 3 minutes, you can observe the results.

Caution:
1. When you use this Foxwell SD201 Car Smoke Leak Detector for the first time, fill with 10-20ml baby oil. Please be careful NOT to beyond this range.
 2. Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time.
 3 . Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
 4. During the process of leak detection, please keep away from smoke-sensitive parts.
5. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
 6. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
 7. The round part of this detector has temperature, please be careful to avoid burns.
 8.  If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
 

Packing List:

1pc Foxwell SD201 Main Unit
1pc Funnel
1pc Smoke Tube
1pc Power Cord
1pc Hook
1pc User Manual  
1pc  Inflatable Adaptor
1pc  Intake Adaptor Cord
1pc  Air Drum Rubber

 

 

 

DataCaciques