Automatic Shoe Cover Dispenser Disposable Shoe Film Machine Fit Home & Office
Description
Type1: Golden
Product size: 60x26x8cm(23.62*10.24*3.15inch)
Product weight: 2.65kg (5.84lb)
Place of use: home/hotel/office building, etc.
Working method: pedal type
Product material: ABS plastic
Product features: easy to use, no space
Applicable maximum shoe size: US shoe size 11/China shoe size 47 (length 28.5cm/11.22inch)
Product weight: 2.65kg (5.84lb)
Place of use: home/hotel/office building, etc.
Working method: pedal type
Product material: ABS plastic
Product features: easy to use, no space
Applicable maximum shoe size: US shoe size 11/China shoe size 47 (length 28.5cm/11.22inch)
It is recommended to purchase shoe mold roll size: inner diameter 7.5CM(2.95inch）, outer diameter 10CM(3.94inch), inner diameter no less than 7.5CM(2.95inch）, outer diameter no more than 11CM(4.33inch), suitable for this model shoe mold machine
Shoe film installation and use steps:
Step 1: Lift the cover and put it aside
Step 2: Pick up a roll of shoe film and align the small shafts on both sides of the shoe film with the slots on both sides of the machine
(Put into the card slot on both sides)
Step 3: Pull out the shoe film and lay it flat on the sponge pad of the shoe molding machine. Note: The shoe mold has the glue-adhesive side up, and the non-sticky side is attached to the sponge pad, so that it will stick to the sole. Cover the noodle cover
Step 4: First, use one foot to step on the paved shoe film slightly, and pull the foot with the shoe film back all the way to the black shoe plate at the back (note that it is not too long to avoid cutting the sleeve) ) Shoe toe should be pressed against the machine and stepped on slightly, the shoe film is cut
Precautions for use
In order for you to use this product better, please follow the precautions below:
1. When installing the shoe film, put the glue side up and the non-stick side
The sponge pad is attached to one side, don't reverse it, so as to stick the sole.
2. When sticking the shoe film to the foot, slowly pull back, the length of the shoe film cannot be longer than the black pedal, so as not to affect the cutting film.
3. Because the cutting blade is sharp, do not touch it by hand. Be careful not to let children play with it and pay attention to safety.
After-sales service：
Every shoe film machine of our company has been rigorously tested before facing the market, and if it is used correctly, it will generally not malfunction. If there is a failure during use, you can directly contact our company please.
Package Included:
Shoe Mask *3 rolls
______________________________________________________________________________________________________________
Type2: Gray +3 roll Shoe Films
Shoe film installation and use steps:
Step 1: Lift the cover and put it aside
Step 2: Pick up a roll of shoe film and align the small shafts on both sides of the shoe film with the slots on both sides of the machine
(Put into the card slot on both sides)
Step 3: Pull out the shoe film and lay it flat on the sponge pad of the shoe molding machine. Note: The shoe mold has the glue-adhesive side up, and the non-sticky side is attached to the sponge pad, so that it will stick to the sole. Cover the noodle cover
Step 4: First, use one foot to step on the paved shoe film slightly, and pull the foot with the shoe film back all the way to the black shoe plate at the back (note that it is not too long to avoid cutting the sleeve) ) Shoe toe should be pressed against the machine and stepped on slightly, the shoe film is cut
Precautions for use
In order for you to use this product better, please follow the precautions below:
1. When installing the shoe film, put the glue side up and the non-stick side
The sponge pad is attached to one side, don't reverse it, so as to stick the sole.
2. When sticking the shoe film to the foot, slowly pull back, the length of the shoe film cannot be longer than the black pedal, so as not to affect the cutting film.
3. Because the cutting blade is sharp, do not touch it by hand. Be careful not to let children play with it and pay attention to safety.
______________________________________________________________________________________________________________
Type3: Silver + 600pcs shoe films
Features:
*Fashionable high airflow, which is practical and also highlights the importance of its beauty to make home life more tasteful
*Soft sponge cushion with coral fleece cover, removable and washable coral fleece cover design is more reasonable
The sponge pad is more comfortable to use
*Easily cut the double-layer encrypted small thorns, the quality can withstand amplification, the process is good, and the design is reasonable
*Cut the film and step on it
*ABS engineering plastic material, the shell is strong and durable
*Slip mat at the bottom of the machine protects the floor
Product parameters:
Specifications: 57*24*16cm
Material: Carbon fiber PP engineering plastic material
Shoe film capacity: 1 roll (about 600 pieces)
The package includes:
1*Shoe film machine
1*600 shoe film
______________________________________________________________________________________________________________
Type4: Space silver +1 roll Shoe Film
Easy membrane breaking in all directions:
1. Depress the black pedal
2. The blade rises
3. Lift your foot and step into the machine's sponge footprint (please step deeper and step harder)
4. After the shoe film is attached to the sole, slowly lift the foot and pull the shoe film back
5. Pull the tip of the shoe to 2-5cm outside the blade, and pull the tip of the toe lower than the blade 2-3cm to pull back, you can break the membrane
6. After the filming of both feet is completed, step on the black pedal to make the blade descend and return to the blade.
(Note: The black pedal only needs to be stepped on at the beginning and end of use, no need to step on the pedal during film breaking!)
Automatic Shoe Cover Dispenser Machine Shoe Membrane Dispenser Overshoes Kit
Description:
Get 1 roll of shoe film free, film provides up to 250 pairs of shoe covers.
Shoe membrane material: ABS plastic, safe and environmentally friendly
Sponge color (gray, yellow, white,) shipped at random.
For cleanliness, don't need to change your shoes, just STEP, PULL and TEAR, convenient and efficient(you step your shoes/boot on the plastic film and then lift your foot and pull back and use the serrated cutter to cut by pointing the toe of your shoes down toward the ground. As soon as you do not need the protective film on your shoes anymore, take it off. )
The is designed as sawtooth, saving effort and durable, easy to cut, when peeling the sticky plastic off the bottom of your shoes, it also remove some excess dirt
Fit any sizes of shoes, easier to apply than shoe covers; perfect for offices, Hygiene Areas facilities, house protection and etc
Package Includes:
1x Silver Shoe Cover Dispenser
1 Roll of Shoe Film
Note:
1. Please understand due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow slight differences due to manual measurement. Thanks for your understanding!
______________________________________________________________________________________________________________
Type5: White +1 roll Shoe Film
Product parameters:
Packing size: 60*20*30cm
Gross weight: 3.5kg
Material：ABS
Scope of application: hospital kitchen, family living room, hotel, dust-free workshop, the elderly and children can use
Features:
1、Each shoe moulding machine is equipped with a roll of shoe film (about 500 times used)
2、Anti-skid design on the bottom makes the shoe moulding machine more stable
3、Easy installation, environmental protection, sanitation, suitable for use in a variety of venues
4、Foot part can be disassembled and cleaned
Shoe mold installation steps
Step 1: Open the head cover of the shoe mold machine
Step 2: Remove the sleeve and install the shoe film into the sleeve
Step 3: Snap the shoe film sleeve into the head of the shoe film machine
Step 4: Cover the panel to complete the installation
Step 5: Pull the shoe film sleeve out of the sleeve
Step 6: Complete use
Step 1: Open the head cover of the shoe mold machine
Step 2: Remove the sleeve and install the shoe film into the sleeve
Step 3: Snap the shoe film sleeve into the head of the shoe film machine
Step 4: Cover the panel to complete the installation
Step 5: Pull the shoe film sleeve out of the sleeve
Step 6: Complete use
Steps for usage:
step1: step on the foot slightly, so that the shoe film covers the entire sole
Step 2: Confirm that the shoe film is attached to the sole, lift the foot and pull it back
Step 3: Pull the tip of the shoe to the top of the pedal switch and step on the pedal, pull it down at a 45-degree angle and cut off
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
