Why Choose FOXWELL RT1000 Automotive Brake Fluid Bleeder Change Machine?
1*FOXWELL RT1000 Main Engine
1*Filling Line
1*Suction & Return Line
1*Standard Joints
2*Waste Liquid Solution Box
Why Do We Need to Change Car Brake Fluid?
After being used for a period of time, automotive brake fluid will have a lower boiling point, pollution and oxidative deterioration, which will affect the brake performance and cause safety hazards. Also, the brake fluid reservoir has a vent, which causes the brake fluid to draw in moisture from the air and turn into air bubbles at high temperatures. When air bubbles appear in the brake fluid pipeline, there will be a loss of braking power or brake failure. Therefore, it is necessary to check the quality performance of the brake fluid according to the operating environment, seasonal changes and working condition, and to exchange it on time. Generally, brake fluid should be exchanged after two years of use or 50,000 km.
Easy-To-Use Brake Fluid Change Machine
1. Add the new brake fluid into the new brake fluid bottle.
2. Connect the input hose and pressure-balanced hose to the brake fluid bottle.
3. Connect the power source.
4. Connect the output hose to the car brake fluid reservoir through the adapter.
5. Connect the fluid recycling bottles to the vehicle brake fluid four sub- cylinders.
6. One button starts, and then observe and wait until the brake fluid exchange is completed.
Warm Tips: Each time you use the equipment, you need to empty the air in the pipeline first, you need to lock the drain screw in the state of brake fluid flow to avoid the suction tube sucking the bottom of the new liquid pot, resulting in the inability to inhale the brake fluid Brake fluid is corrosive, to keep the equipment and the vehicle paint surface clean.
Significant Advantages Over Traditional Manual Brake Fluid Change Tools
|
|
|
|---|---|---|
High-pressure Shutdown ProtectionFOXWELL RT1000 brake bleeder change machine is set to limit the working pressure (0.3MPa) to avoid misuse of the pressure caused by the upsurge of the potential safety hazards. | Dual Switch DesignTo avoid damage to the vehicle brake fluid pot due to the high pressure startup of the device because the regulator knob was not reset to zero after the last job. | Dual Pump DesignDual pumps work at the same time to form a stable constant pressure, avoiding the pulse of a single motor to generate air into the tube, and more stable pressure regulation, avoiding additional impact on the vehicle brake fluid jugs and the sub-pumps. |
|
|
|
|---|---|---|
Low Fluid Shutdown Protection Function:When the brake fluid in the new fluid pot is consumed, the equipment will automatically shut down to avoid inhaling air into the brake system. | Corrosion ResistantInternal and external piping and components are made of corrosion-resistant materials to extend the service life to meet customers' long-term needs. | Large Capacity Oil BottleAdd enough oil at once to avoid frequent oil additions, use recycled pots imported from Japan, sturdy and durable. |
