The Armor SC25 is a fast-acting water repellent sealer for light or white concrete surfaces. Derived from a catalyzed Siliconate solution, the Armor SC25 penetrates deep into the concrete surface where it chemically reacts to form a hydrophobic barrier within the pores. Water and other liquids will bead off the sealed surface, reducing deterioration caused by water absorption such as cracking, spalling, freeze-thaw and salt damage, staining, mold and mildew, and efflorescence. The Armor SC25 is a very cost-effective solution for sealing concrete as it requires only one coat and can last for up to 5-7 years. Looking for a professional grade alternative? Consider the Armor SX5000 WB DOT Approved water repellent sealer.
Benefits:
- Manufactured in the USA
- Will maintain the natural, unsealed feel of the substrate
- Breathable, low VOC
- Will provide up to 5-7 years of life before the need for a recoat
- Will reduce deterioration caused by water absorption such as cracking, spalling, pitting, staining
- Will reduce the formation of efflorescence
- Will reduce the formation of mold and mildew
- Will reduce freeze-thaw and salt damage
- Will reduce the movement of moisture through the concrete pores
- Required only 1 coat
Coverage: On average, 175 FT2/gallon in one coat. Coverage rates may vary depending on surface porosity. DO NOT use on medium-dark gray concrete, brick, stone, or other types of masonry. Designed specifically for white or very light unsealed concrete.