Argon CO2 Mig Tig Flow Meter Regulator Welding Gas Gauge Welder Single/Dual USA

Features:

• Professional and Versatile Flowmeter - We offers this flow meter which fits Argon, C02 and Argon/Co2 fixed, Suitable for most argon tanks,argon hose for Miller, Lincoln and other tig mig welders. This flowmeter is also perfect for home-made kegerator, home brew system, etc.
• Study and Accurate - There is cfh for both argon and co2 on the flow tube.The output flow is adjustable from 0 to 25 lpm. And is indicated by a ball which moves up and down in the flow tube. Simple to use and easy to read output.
• No Leaks, Super Easy to Adjust - All the hardware of this flowmeter regulator was tight and passed the leak test.You can easily turn the adjustment knobs by hand. Very easy to use every time.,Perfect for Mig and Tig welding.
• 100% High Quality and Sturdy - The Flowmeter regulator is made of high quality brass and came with GA580 adapter.And the Square flow tube reads from 0 - 60 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4000 PSI.

Usages:

• Reduce and control the pressure of gases for Welding work
• Applicable for many kinds of gases, such as CO2, argon, etc
• Adopt piston decompression method, gas of high pressure enters into the regulator and then low pressure releases
• Can see numerical values of the LPM of carbon dioxide and argon from the transparent tube
• The pressure gauge which shows how much gas is left in the tank goes from 0 to 3500 psi

Specifications:

• Color: Transparent + Golden
• Material:PC + Copper
• Volume Range: 10 to 60 cfh (cubic feet per hour)
• Pressure Range: 0-4000 PSI
• kgf/c㎡ Range: 0-280 kgf/c㎡
• Inlet connection: CGA580
• Connection Thread : 9/16-18 RH Male,male, 5/8-18 RH Male,-14RH Male
• Dimensions: (6.30 x 6.30 x 3.94)" / (16 x 16 x 10)cm (L x W x H)
• Weight: 26.46oz / 750g

10FT Gas Hose:

• The Argon Flow Meter fits Argon, CO2 and Argon/CO2 fixed, Suitable for most argon tanks,argon hose for miller or Lincoln welders.
• This Gas Hose Is Ideal For Fitting Mig And Tig Welding.
• Rubber hose, Inert Gas Fitting, for Argon Welding Gas.
• Hose Length: 10FT, This Hose Is Standard UNF 5/8".

Package Include(Depending on your choice): 

A  Regulator + Hose

• 1 x Flowmeter
• 1 x 10Ft (3M) Hose 
• 3 x Converter adapter