APOLLO 17 CREW COIN CERNAN, SCHMITT & EVANS LAST OF THE APOLLO MOON MISSIONS LAUNCHED DEC 7TH 1972
Mint condition 1.5" BRONZE COIN ORIGINAL MINTED IN 1970'S
The lunar landing site was the Taurus-Littrow highlands and valley area. This site was picked for Apollo 17 as a location where rocks both older and younger than those previously returned from other Apollo missions, as well as from Luna 16 and 20 missions, might be found.
The mission was the final in a series of three J-type missions planned for the Apollo Program. These J-type missions can be distinguished from previous G- and H-series missions by extended hardware capability, larger scientific payload capacity and by the use of the battery-powered Lunar Roving Vehicle, or LRV.
Scientific objectives of the Apollo 17 mission included, geological surveying and sampling of materials and surface features in a preselected area of the Taurus-Littrow region; deploying and activating surface experiments; and conducting in-flight experiments and photographic tasks during lunar orbit and transearth coast. These objectives included deployed experiments, such as the Apollo Lunar Surface Experiments Package, or ALSEP, with a heat flow experiment; lunar seismic profiling, or LSP; lunar surface gravimeter, or LSG; lunar atmospheric composition experiment, or LACE; and lunar ejecta and meteorites, or LEAM. The mission also included lunar sampling and lunar orbital experiments. Biomedical experiments included the Biostack II experiment and the BIOCORE experiment.
Mission Highlights
At 9:15:29 a.m. GMT Dec. 7, 1972, the command and service module, or CSM, was separated from the S-IVB. Approximately 15 min later, the CSM docked with the lunar module, or LM. After CSM/LM extraction from the S-IVB, the S-IVB was targeted for lunar impact, which occurred Dec. 10, at 8:32:43 p.m. The impact location was approximately 84 nautical miles northwest of the planned target point and the event was recorded by the passive seismic experiments deployed on the Apollos 12, 14, 15 and 16 missions.
Only one of the four planned midcourse corrections was required during translunar coast. A midcourse correction made at 5:03 p.m. Dec. 8, was a 1.6 second service propulsion system burn resulting in a 10>:5 feet/second velocity change. Lunar orbit insertion was accomplished at 7:47:23 p.m. Dec. 10, placing the spacecraft into a lunar orbit of 170 by 52.6 nautical miles. Approximately four hours, 20 minutes later, the orbit was reduced to 59 by 15 nautical miles. The spacecraft remained in this low orbit for more than 18 hours, during which time the CSM/LM undocking and separation were performed.
