| General Specifications | |
| Product Type | 1-BTS:1-ANT (Uniplex) |
| Modularity | 2-Twin |
| Includes | Mounting hardware |
| Electrical Specifications | |
| Sub-module | 1 | 2 |
| Branch | 1 |
| Port Designation | ANT |
| AISG 2.0 Device Subunit | E15S08P80 1/2 |
| License Band | AWS 1700, LNA |
| Electrical Specifications Rx (Uplink) | |
| Frequency Range | 1710–1755 MHz |
| Bandwidth | 45.00 MHz |
| Gain, nominal | 12.0 dB |
| Gain Tolerance | ±1 |
| Noise Figure, maximum | 1.3 dB |
| Noise Figure, typical | 1.1 dB |
| Total Group Delay, maximum | 40 ns |
| Output IP3, minimum | 22 dBm |
| Return Loss, typical | 20 dB |
| Insertion Loss - Bypass Mode, typical | 1.5 dB |
| Return Loss - Bypass Mode, typical | 18 dB |
| Electrical Specifications Tx (Downlink) | |
| Frequency Range | 2110–2155 MHz |
| Bandwidth | 45.00 MHz |
| Insertion Loss, maximum | 0.30 dB |
| Total Group Delay, maximum | 10 ns |
| Return Loss, typical | 20 dB |
| Input Power, RMS, maximum | 200 W |
| Higher Order PIM, typical | -153 dBc |
| Higher Order PIM Test Method | 1 x 20 W AWS CW tone 1 x 20 W PCS CW tone |
| VSWR Alarm Threshold | 9.54 dB |
| VSWR Alarm Threshold Tolerance | ±2 dB |
| Product Classification | |
| Product Type | Tower mounted amplifier |
| | |
| AISG Electrical Specifications | |
| Voltage, AISG Mode | 10–30 Vdc |
| Protocol | AISG 2.0 |
| AISG Connector | 8-pin DIN Female |
| AISG Connector Standard | IEC 60130-9 |
| | |
| dc Power/Alarm Electrical Specifications | |
| Voltage | 7–30 Vdc |
| Voltage, CWA Mode | 10–18 Vdc |
| dc Switching/Redundancy | Yes |
| Operating Current at Voltage | 100 mA @ 12 V |
| Operating Current Tolerance | ±20 mA |
| Alarm Current, CWA Mode | 190 mA ±10 mA |
| Lightning Surge Current | 20 kA |
| Lightning Surge Current Waveform | 8/20 waveform |
| | |
| Block Diagram | |
 Click on image below to enlarge. | |
| | |
| Mechanical Specifications | |
| RF Connector Interface | 7-16 DIN Female |
| RF Connector Interface Body Style | Long neck |
| Ground Screw Diameter | 6.00 mm |
| Color | Gray |
| Finish | Painted |
| Mount Type | Pole | Wall |
| Mounting Pipe Diameter | 40–160 mm |
| Mounting Pipe Hardware | Band clamps (2) |
| Wind Speed, maximum | 200 km/h | 124 mph |
| | |
| Dimensions | |
| Height | 160.0 mm | 6.3 in |
| Width | 196.0 mm | 7.7 in |
| Depth | 78.0 mm | 3.1 in |
| Weight | 3.0 kg | 6.6 lb |
| | |
| Environmental Specifications | |
| Operating Temperature | -40 °C to +65 °C (-40 °F to +149 °F) |
| Relative Humidity | Up to 100% |
| Ingress Protection Test Method | IEC 60529:2001, IP67 |
| | |
| Outline Drawing | |
| Click on image below to enlarge. | |
Regulatory Compliance/Certifications
| Agency | Classification |
| ISO 9001:2008 | Designed, manufactured and/or distributed under this quality management system |
Electrical Parts Skid#3