ANCEL S300 Automotive EVAP Smoke Machine Vacuum Leak Detection Diagnostic Tool

$69.99
Model
ANCEL S100
Warranty
3 Year
OBD Interface
CAN, EOBD, OBD, OBDII
Type
EVAP Smoke Machine
Brand
ANCEL
Manufacturer Part Number
EVAP Smoke Leak Detector AS SDT301 S3000 SM601
Vehicle Type
Heavy Duty/Commercial, Motorcycle, Passenger Vehicle, ATV
Voltage
DC 12V Battery
output pressure
15psi
Supported System
EVAP System,, Exhaust System, Intake system, Cooling System, Fuel Tank System
Function 1
EVAP Smoke Machine Diagnostic
Function 2
Pipe Exhaust Intake Pipe Smoke Leakage Detector Tester
Application
for Cars,trucks ,vans,motorcycle, boat,ATVs
Material
Iron
Color
Pink
Test Liquid
Baby Oil(Does not include)
Type 2
Smoke Leak Detector Fuel Pipe Leak Tester
Output Flow
6L/min
Work environment
-20℃~75℃
Working mode
Air Mode,Smoke Mode
condition
New
ANCEL S300 Automotive EVAP Smoke Machine Diagnostic Tool Vacuum Leak Detection

ANCEL S300 Car Smoke Machine Leak Detector 12V Car EVAP Fog Machine Vacuum Diagnosis Fuel Pipe Leak Tester for All Cars /Trucks (Excluding Baby Oil)

Ancel S300 supports multi-system testing, especially EVAP system

EVAP System Test
Intake System Test
Exhaust Systems Test
Crankcase system test
Car Sealing Test
Fuel Tank System Test
Turbo System Test
Various Pipe Fittings Test

Do You Bothered By The Following Problems?

More fuel consuming?
Faster idling speed?
Water Leaks?
Hard to find the leaks?

Upgraded S300 Automotive Smoke Machine

Fits All Lines and Hoses

How to use Ancel s300?

1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.

2. Disconnect the pipe that needs to be connected with detector.

3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work

4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

2 kinds of modes: AIR model+Smoke mode

Air mode :First, use the air mode to directly measure the leak, and judge whether there is a leak by the pressure gauge value. If it is less than 0.5bar, it will inevitably leak. If it reaches 0.8bar and above, the pipeline tightness is very good.Then there is no need to waste baby oil
SMOKE MODE:After the air mode determines that there is a leak, use the smoke mode to find the leak.

How to judge leakage- through the pressure gauge?

NO Leak: When the value of the pressure gauge remains unchanged and the flow meter will read zero (ball at bottom of scale), it means that there is no leakage in the system.
Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system.
Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.

Adjustable Smoke Output Help To Pinpoint Leaks Quick

Adopt The Latest 5th Generation Technology

Overheat & Anti-frost Protection

Overheat Protection

When the temperature of the device exceeds 75℃, power protection will be intelligently activated to turn it off.

Anti-frost Protection
The device can also work normally at -20℃.

Easy To Detect an Air Leak Vehicle Cabin

Diagnose All Types Of Leaks With Adapters

Power Cord
Delivery Hose
Funnel
Intake Bladder
Service Replacement
Adapter Cone
EVAP Adapter
EVAP Removal Tool
Cap Plugs Kit

ANCEL S100/S200 FULL SYSTEM DIAGNOSTICS, DON'T MISS ANY LEAKS

EVAP SYSTEM TEST: Leakage in the fuel evaporation system causes fuel vapour to escape into the atmosphere, resulting in waste and pollution or unstable engine idling.

EXHAUST SYSTEM TEST: Uncleaned harmful gases escaping into the atmosphere or increasing the noise of the vehicle are the main disadvantage when leaks occur in the exhaust.

FUEL TANK SYSTEM TEST: If there are gaps in the fuel tank and pipes caused by improper installation or insufficient sealing of the fuel tank cap, it may cause leaks in the fuel tank system.

TEST OF VARIOUS PIPE CONNECTIONS: Smoke test of brake hoses, power steering hoses, cooling system hoses, air conditioning system hoses, turbocharger hoses, fuel hoses, intake and exhaust system hoses, etc.

CAR SEALING TEST: Poor sealing of the car can lead to many inconveniences, such as it is not warm and dusty, not soundproof, not waterproof, etc.

CRANKCASE SYSTEM TEST: Excessive pressure or corrosion of the crankcase is the main reason why the crankcase seal is damaged and oil leaks.

INTAKE SYSTEM TEST: A leak in the intake system will result in inadequate intake of the car engine, leading to low engine performance.
TURBO TEST: The leakage of coolant would cause the engine to indicate a high water temperature.

How to do leakage test?

Step 1: Fill in 10ml-20ml test oil (baby oil) to the detector

Step 2: Connect the delivery house to the detector

Step 3: Disconnect the pipe that needs to be connect with the detector

Step 4: Connect detector with DC12V battery,device starts to work

Step 5: The pipe will be filled with smoke,check the leak points  

ANCEL S100 ADVANCED TECHNOLOGY

Intake System Test,Exhaust Systems Test,Crankcase system test,Car Sealing Test,Fuel Tank System Test,Turbo System Test,Various Pipe Fittings Test.

OVERHEAT & ANTI-FROST PROTECTION

Overheat Protection:When the temperature of the device exceeds 75℃,power protection will be intelligently activated to turn it off.

Anti-frost Protection:The device can also work normally at -20℃

Smoke Leak Detector ANCEL S100

Output pressure:0.5PSI
Output Volume:<8LPM
Power Supply:DC12V
Current:5AMP

Product S100 Packing List

1pc * ANCEL S100 Car Smoke Leak Detector Main Unit
1pc * Power Cord
1pc * Hook up
2pc * EVAP Kit
1pc * Smoke Delivery Hose
1pc *Air Adpt

ANCEL S200 Package List

ANCEL S300 Package List

 

ANCEL S100/S200/S300 Car Smoke Leak Detector Support All of Car Models

For detecting the leakage of pipe systems on cars,motorcycles,snowmobiles,off-road vehlicles,ATVS,light trucks and speedboats,Suitable for all car models