ANCEL PB600 Circuit Tester Electrical Diagnostic Power Probe Fit For Heavy Truck
ANCEL PB600 Product Description
⭕【Multiple Functional Modules for Automotive System】Multiple functions - almost covering the probe tools on the market.
With ✅Multimeter function, ✅Oscilloscope mode, ✅Continuity testing, ✅Relay test, ✅Activating components in your hand, ✅Power supply/ground detecting/open & short testing, ✅Trailer lights testing, ✅Signal circuit testing, ✅Checking for Bad Ground Contacts, ✅Clean the Injectors, ✅30FT extension cable & LED light,✅ AC/DC voltage/resistance/diode/frequency testing.
⭕【Multimeter & Oscilloscope Tester】The PB600 Circuit tester will be the more versatile and powerful Power Circuit Probe Kit you've ever seen. Contains the multimeter's DC voltage (VDC), resistance (OHM), diode/on-off test (DIO), current (AMP) and frequency test functions, combined with the unique oscilloscope function and buzzer, can test components according to voltage, resistance value, frequency duty cycle, and waveform diagrams to quickly diagnose problems with your circuit system.
⭕【Activating Electrical Components】Being able to ap-ply battery power or ground right to the probe tip gives you the ability to activate and dynamically test electrical components such as lights, motors and solenoids.
⭕【Smart Test & Positive & Negative Test】When connected to the probe of Car Electrical Test Tool to measure voltage, resistance, positive/negative polarity, it will automatically become an instant auto-range, intelligent judgment does not require manual selection, and the corresponding parameter values and prompts are displayed on the HD LCD screen. With a 30ft cable, you can quickly assist you in diagnosing the car's condition without opening the wiring.
⭕【Clean the fuel injector】It is extremely important to regularly test the fuel injector. PB600 provides 4 types of pulse signals (once or multiple times) combined with car cleaner to achieve maximum cleaning effect.
⭕【Relay Test】There’s nothing worse getting stuck on the trail at night because your light relay burnt out, losing your radio in the middle of a road trip, or not being able to finish your project because you’re short one small relay. With our PB600 relay test, fix your lights on the fly, and keep the road trip rocking all night long.
⭕【Widely Application】The ANCEL PB600 is essential for a range of automotive diagnostic scenarios, whether you're a professional mechanic troubleshooting complex vehicle issues or a DIY enthusiast performing routine maintenance tasks. With its versatile capabilities, it's perfect for diagnosing electrical problems, testing relays, analyzing fuel injectors, activating components, and even utilizing oscilloscope mode for advanced troubleshooting. It's a must-have tool for anyone working on automotive electrical systems
⭕【Multimeter & Oscilloscope Tester】The PB600 Circuit tester will be the more versatile and powerful Power Circuit Probe Kit you've ever seen. Contains the multimeter's DC voltage (VDC), resistance (OHM), diode/on-off test (DIO), current (AMP) and frequency test functions, combined with the unique oscilloscope function and buzzer, can test components according to voltage, resistance value, frequency duty cycle, and waveform diagrams to quickly diagnose problems with your circuit system.
⭕【Activating Electrical Components】Being able to ap-ply battery power or ground right to the probe tip gives you the ability to activate and dynamically test electrical components such as lights, motors and solenoids.
⭕【Smart Test & Positive & Negative Test】When connected to the probe of Car Electrical Test Tool to measure voltage, resistance, positive/negative polarity, it will automatically become an instant auto-range, intelligent judgment does not require manual selection, and the corresponding parameter values and prompts are displayed on the HD LCD screen. With a 30ft cable, you can quickly assist you in diagnosing the car's condition without opening the wiring.
⭕【Clean the fuel injector】It is extremely important to regularly test the fuel injector. PB600 provides 4 types of pulse signals (once or multiple times) combined with car cleaner to achieve maximum cleaning effect.
⭕【Relay Test】There’s nothing worse getting stuck on the trail at night because your light relay burnt out, losing your radio in the middle of a road trip, or not being able to finish your project because you’re short one small relay. With our PB600 relay test, fix your lights on the fly, and keep the road trip rocking all night long.
⭕【Widely Application】The ANCEL PB600 is essential for a range of automotive diagnostic scenarios, whether you're a professional mechanic troubleshooting complex vehicle issues or a DIY enthusiast performing routine maintenance tasks. With its versatile capabilities, it's perfect for diagnosing electrical problems, testing relays, analyzing fuel injectors, activating components, and even utilizing oscilloscope mode for advanced troubleshooting. It's a must-have tool for anyone working on automotive electrical systems
Product Specifications
Display：2.4 inch TFT (320*240 DPI )
Supply Voltage：DC: 8V ~ 35V
Operating Temperature： -20℃( -4℉) to 50℃ ( 122℉)
Storage Temperature： -40℃( -40℉) to 65℃ ( 149℉)
Dimensions (L*W*H)：228*80*32mm
DC/ AC Voltage Test： -110V ~ +110V (True RMS Measure)
Frequency：0Hz ~ 1Mhz
Duty Cycle：0.0%~100.0%
Fuel Injection：Voltage: 0~180V, Time: 0~25ms
Resistance：0~1MΩ
Diode：Germanium diode, silicon diode
Relay Test：Regular vehicle 4-pin or 5-pin relays
Battery Test：100-2000 CCA, 12V vehicle battery
Rating Current：1A~8 A
Multiple Functional Modules:
1. Oscilloscope (Oscilloscope) Test Module
Oscilloscope test function is mainly to test a variety of voltage signals, contains four kinds of functions, respectively, DC voltage test, AC voltage test, frequency test, duty cycle test, except DC voltage, the other three are except DC voltage, the other three have waveform display mode, which is part of the oscilloscope function.
1. Oscilloscope (Oscilloscope) Test Module
Oscilloscope test function is mainly to test a variety of voltage signals, contains four kinds of functions, respectively, DC voltage test, AC voltage test, frequency test, duty cycle test, except DC voltage, the other three are except DC voltage, the other three have waveform display mode, which is part of the oscilloscope function.
2. Multimeter Test Module
The multimeter test function module mainly tests resistor resistance and diode forward voltage. Among them, the resistance measurement function also contains a continuity test function, i.e., when the resistance of the tested wire is less than 30 ohms, the host When the resistance of the tested wire is less than 30 ohms, the buzzer of the main unit will alarm, which is used to measure whether the wire is disconnected or not.
3. Fuel Spray Nolle Test Module
Injector test function module is mainly to test the parameters of the injector signal, and can be switched by pressing the key Waveform display and digital display mode.
4. Relay Test Module
The Relay Test Function Module tests and helps to identify whether a vehicle relay is functioning correctly, primarily through relay test cables, auxiliary earth wires and probes.
5. Battery Test Module
Battery test function module is mainly to test the car battery system, contains 3 functions, respectively, battery health test, battery start test, battery charging test, etc., so as to test the good or bad of the car battery
6. Active Test Module
The component activation detection function is mainly used to activate automotive components by pressing a specific button to make the host probe connect to the positive pole of the car battery or ground, thus supplying power to the automotive components.
7. Pn-active Test Module
The PN-TEST test function module functions in the same way as the diode test in the multimeter test module.
8. Setup Module
The setup module is used to set the host status, such as language selection, buzzer switch, instrument self-test, host upgrade and host version number.
...
Double Overload Protection
ANCEL PB600 automotive circuit tester, your top-notch safety pick! With an internal circuit breaker and a 10A fuse on the ground wire, it offers rock-solid dual protection. When current overloads, the fuse blows first to safeguard your product and car.The toolbox comes with 2 extra fuses for replacement. Whether checking continuity or short/open circuits, PB600 takes it all in stride!
Component Activation & Relay Test
ANCEL PB600 can generate activation signals for numerous electrical components such as lights, motors, windshield wipers, radiator fans, relays and fuel injectors, quickly diagnosing electrical faults. When extracting DTCs from the vehicle's ECU, this tester can also test various sensors and circuits, deeply exploring the root problems of the car's electrical system.With PB600, you can easily become an automotive electrical expert and no longer worry about car electrical failures!
What Can PB600 Do?
Follow& Locate Short Circuits
Injrctor Test
Diagnose Electrical System
Relay/Fuse Test
12V Battery Test
Component Activation
Product Technical Features and Advantages:
1) This instrument is powered by car battery, no need to bring your own battery, save money and convenient.
2) This instrument comes with a light-emitting diode, so that it can be used in the engine compartment and other dark places without being affected.
3) This instrument comes with a sharp probe and a crochet hook, so you can measure without removing the wiring.
4) This instrument can import positive or negative batteries to the probe, making it easy to power various appliances for testing without having to re-pull wires to power the appliances.
5）Can simultaneously test the battery voltage and front-end probe voltage, battery voltage using the Kelvin test method, so that the measurement is more accurate, the front-end probe can measure the negative voltage.
6) AC voltage mode can be convenient to measure the true RMS value of the AC voltage.
7) Waveform display makes the instrument conveniently display the signal waveform, voltage, frequency, duty cycle, etc. on the data line of the car.
8) Fuel injection mode makes it easy to capture fuel injection time, injector voltage and other data.
9) Resistance and on-off detection technology can easily detect the on-off of the car line, the size of the resistance value, etc..
10) Diode detection technology can detect the diode in the car electrical good or bad.
11) This instrument has a short circuit protection function. If the device is overloaded, its internal circuit breaker will trip to effectively protect the instrument, prevent overload damage to the instrument.
TIPS:
1.PB600 is ONLY for 12-24V vehicle battery electrical systems, and should NOT be used to test 110/220V household electric appliances; or, it will be damaged.
2. The LED and LCD pull no more than 100 milliamps of current, therefore when using this device as a test light or multimeter, it is safe for computers and airbags.
3.When powering-up components, you can increase the life of rocker switch in the tool if you first press the switch, and then contact the tip to the component. The arcing will take place at the tip instead of the metal contacts of the rocker switch.
Appearance Patent - Verification Of Conformity
Package Included
Complete Accessories：Its total cable length exceeds 30 feet, enabling effortless detection of circuit faults anywhere in the vehicle. Moreover, it comes with a complete set of components including probes, relay test wires, fuses, piercing needles, and hooks. You can freely combine these components to flexibly meet various testing requirements. Additionally, it offers considerate multi-language options, polarity indicator lights, buzzer alarms, LED lights and f*ree software upgrade services
