ANCEL BA101 12V 100-2000 CCA Car Auto Load Battery Tester Tool Digital Analyzer

$39.99
Warranty
Yes
Brand
Ancel
Manufacturer Part Number
Car Battery Tester Analyzers
Battery Test Type
AGM, Flooded, Gel, Lead-Acid, VRLA
Features
Bad Cell Detection, LCD Display, Multi-Language Interface
Accessories
Carrying Case, Clamps, User Manual
Voltage
12V
Language
English, Spanish, French, German, Italian and Poli
UPC
712321437518
Special Features
Vehicle Battery Analyzer
condition
New
12V 100-2000 CCA 220AH Automotive Load Battery Tester Digital Analyzer Bad Cell
 

The ANCEL BA101 can be used to test a wide range of 12V batteries including Starting, Lighting, and Ignition (SLI), Deep Cycled and Marine (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM), and GEL cell. The major battery standards JIS, SAE, EN, DIN, and IEC are supported. BA101 12V car battery tester can easily, quickly and accurately measure the actual cold cranking amps capability, the health status of the battery itself, and the common fault of the vehicle's starting system and charging system.

The BA101 Advantages:

  • Simple and easy to use
  • Tests batteries on and off the vehicle
  • Accurate results in milliseconds
  • Battery life analysis
  • Analysis results: Good or Replace
  • Large easy to read LCD screen
  • Test results based on JIS, EN, DIN, SAE and IEC Standards
  • Quick test - inputs battery volume (AH), then shows battery status
  • Vehicle cranking system test - cranking time, voltage and status
  • Store the testing result and the print function
  • Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status

 

battery tester

BA101 Functions:

  • Test Results: Good or Replace
  • Internal resistance value (m)
  • Life in percentage (%)
  • Cranking system
  • Charging system
  • Operating Parameters:
  • System voltage: 12 Volts
  • Input voltage range: 9V~15V
  • Power requirements: No internal batteries required
  • Capacity: Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating

 

battery tester

ancel
Five Different Results of Battery Testing

  • GOOD BATTERY:The battery is without any problem.
  • GOOD, RECHARGE:Good battery but low current, and recharge before using.
  • REPLACE:The battery is already at or near the end of its use life, and please replace the battery.
  • BAD CELL, REPLACE:Battery interior damaged, bad cell or short circuit, and replace the battery.
  • CHARGE-RETEST:Unstable battery shall be recharged and retested to avoid error.

 

Is the battery good or does it need to be replaced?

It tests the battery's CCA (or AH) value, charge (%), voltage (v), internal resistance (Ω), rated, and battery health (%), etc. After a comprehensive analysis of the data, it provides an accurate assessment of whether a battery is good or needs to be replaced. The test result is shown directly by text prompt, giving an accurate display of the battery with percentage and numerical values.

  • Conductance correlates directly to the battery capacity.
  • The passive testing method is safe.
  • Never discharges or drain the battery.
  • Able to test the condition of the discharged battery.
  • Consistent and repeatable results.
  • It provides a unique indication of battery conditions.
  • Powers up when connected to the battery posts during testing.
  • It provides checking the Alternator's charging and Starter's cranking conditions. It is maintenance free and no internal batteries required.
 

battery

fast

print

Multiple Battery Standards Support

  • It can test by AH and CCA values but also applies to other test standards such as BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
  • If your battery standard is AH standard, you can input the AH value to test in the "Quick Test" menu.
  • If your battery is CCA or another standard, please input the CCA or other value to test in the "Battery in Vehicle" or "Battery out of vehicle" test menu.

 

Fast and Accurate Reading

  • It adopts the world's most advanced conductance testing technology to date for accurate and authoritative test results.
  • It quickly analyzes the data, usually taking 2-3 seconds to display the results.
  • Easy to use, it can quickly and accurately identify battery problems.

 

Print Data Steps

  1. Before using the print data function, it is necessary to connect the tool to a computer via the USB cable. Once ready, please insert the CD to the computer.
  2. Install the USB driver first.
  3. Open the print software, and choose the COM Port NO.
  4. Then choose the function of print data to start printing.
PushAuction


On Sep 26, 2024 at 20:39:01 PDT, seller added the following information:

DataCaciques