Aluminum Oxide 25 lbs - 120 Grit (Medium) - Blast Cabinet Abrasive Media Tough

Slide Slide Slide
$42.99
Brand
United Abrasive Incorporated
Type
Blast Cabinet
Unit Type
lb
Maximum Working Pressure
100 psi (60 to 80 psi recommended)
Color
See picture
Item Diameter
0.0049" (125 micron) average particle diameter
Model
Aluminum Oxide 120 GRIT
Air Inlet Size
3 times ID of Nozzle bore
MPN
AOE120-25
Country/Region of Manufacture
United States
Unit Quantity
25
Item Weight
25 pounds
condition
New

Aluminum Oxide

1200 Grit or Mesh (0.0049" or 125 um - average particle diameter)

25 lbs.

Blasting Cabinet Abrasive Media

Condition is New

Shipped with USPS Priority Mail in 25 lb. box

25 lb. Aluminum Oxide available grit sizes:

24, 30, 36, 46, 54, 60, 80, 100, 120, 150, 180, 220, 240, and 240F

 

EconoblastTM "E" - Aluminum Oxide (Blast Cabinet Abrasive)

EconoblastTM is an excellent media for use in blast rooms or blast cabinets, where the grit is contained for re-use (up to 30 or more re-uses). Synthetic (man-made) Aluminum Oxide is a silica free inert compound, with a tough crystalline structure, and a uniform hardness of 9 on the MOHS scale (Diamond is 10). These properties combined with uniform particle sizing provide high-speed production with excellent visibility (very low dusting), and lower air requirements (60 to 80 psi recommended). Unlike most other blast media, which are natural or by-products, synthetic AO has uniform properties without random natural weaknesses, making it the most widely used abrasive in the world. When using aluminum oxide for blasting, it is strongly recommended to use tungsten or boron carbide nozzle.

EconoblastTM Aluminum Oxide (recycled) -- Blend of precisely graded, high purity white, pink, ruby, and sintered aluminum oxide grains, which are normally much too expensive to be used for pressure blasting. EconoblastTM is one of the fastest cutting abrasives, and is highly recyclable, reducing time, cost, and waste! Econoblast is uniformly sized for repeatable finishes and high visibility. EconoblastTM is an Eco-Friendly synthetic aluminum oxide abrasive grain, produced by recycling vitrified bonded grinding wheels, otherwise destined for landfills. This abrasive has a proven 80+ year history as a seamless substitute, for many applications using virgin aluminum oxide.

USES:  Wheel/Stone manufacture, Pressure Blasting Cabinet/Room (surface preparation  for bonding, removing hard coating, power turbines, hardened metal, scale removal, glass/stone/ceramic etching, investment castings, light deburring, matte finish, and for high production rates), Water-Jet, Lapping, Mass Finishing, other finishing operations.

 

See our other available abrasive media on ebay:

Aluminum Oxide, Silicon Carbide and White Aluminum Oxide in three different package sizes: 4 lbs., 25 lbs., and 50 lbs. Our 50 lbs. package is shipped in two 25-pound boxes and the others come in a single box.

We are able to size to meet any standard, and can do custom sizing to make grit sizes: 16, 20, 24, 30, 36, 46, 54, 60, 80, 100, 120, 150, 180, 220, 240, and 240F

These grit sizes conform to the American National Standards Institute (ANSI) B74.12-2001 Table 2 Allowable Limits for the Sizing of Aluminum Oxide and Silicon Carbide Abrasive Grain for Grinding Wheel Manufacture and General Polishing Purposes.

 

For every ton of Econoblast sold – 1 to 2+ tons of "Red Mud" Sludge are prevented from being generated!

 

For Your Information (FYI)

White, pink, ruby, and ceramic aluminum oxides, known as specialty aluminum oxide abrasives, are produced via the "Bayer Process". This process, also used to make aluminum metal, requires the use of caustic soda (lye), which generates a dangerous sludge byproduct, with a pH between 9 to 13, called "Red Mud". For every ton of high purity alumina produced, 1 to 2+ tons of red mud are generated. The US EPA estimates over 3,000,000,000 tons of red mud are being stored around the world, and around 120 million tons are added each year. In October 2010 one of the storage sites collapsed, releasing a 3-to-7-foot wave of this toxic waste. Ten people died, many had severe chemical burns, and the ecological effects continue to this day. (Our recycling process does not require use of any chemicals, and only requires a fraction of the energy. By using our recycled aluminum oxide, you are reducing the use of our primary resources, and the generation of toxic “Red Mud”.)

 

Uses

  • Removal of rust, scale, sand, or paint from fabricated components
  • Producing surface profile for an increase of surface area prior to coating (increasing bond strength)
  • Roughening of industrial gas turbine engine component surfaces in preparation for thermal spray coating
  • Removal of burrs or edge profiling machined components
  • Etching, or producing a matte cosmetic surface finish on consumer products
  • Removal of mold flash from plastic components
  • Surface texturing of tooling and molds to alter the appearance of molded or stamped products
  • Other Applications: Grinding Wheel Manufacture, Anti-Slip Additive, Non-Slip & Abrasion Resistant Aggregate/Grit/Media, Polishing Pastes & Compound Manufacture, Vibratory Mass Finishing Additive, Chemical Resistant and High Temperature Applications

 

SAME DAY SHIPPING on most orders placed before 1:00 Central Time!
Significant SAVINGS by ordering larger 50, 500, 1000, 2500+ lb. quantities
SAVE by combining grit sizes, list quantity of each size and request total

 

* Photos are of the correct type of abrasive blast media, not necessarily the exact grit size, unless specified.

Why Use Aluminum Oxide?

  • Most economical abrasive media for cabinet blasting when reused
  • Most extensive range of grit sizes
  • Good recyclability
  • Precisely graded into specific sizes providing fast and consistent performance
  • Produces best surface for coating bond strength
  • Usable at lower air pressures, reducing compressed air costs

Abrasive Applications

  • Cleaning
  • Deburring
  • Blasting Light Gauge Metal
  • Surface Preparation to Increase Bond Strength of Paint or Coating
  • Etching, Frosting, or Producing a Matte Finish on Metal, Glass, or Stone
  • Water Jetting Media
  • Jobs Requiring a High Production Rate or Non-Ferrous Media
  • Blasting/Cutting Hard Materials
  • Removal of Rust, Paint, Scale, etc. from Fabricated Components
  • Cutting Stone, Metal, Glass, etc.
  • Creating Specific Surface Profile

Characteristics

  • Consistent Uniform Properties and Particle Sizes
  • Sharp, Angular Shape
  • 95% Minimum Purity
  • Wide Range of Specific Grit Sizes From Fine Powder to Large, Coarse Aggregate)
  • Reusable (number of uses mainly determined by air pressure)
  • High Hardness of 9 on the Mohs Scale (Diamond is 10)
  • Uniform Particle Size (no chunks, no dust)
  • Usable at Lower Air Pressures, Reducing Compressed Air Costs
  • Fast Production Rate
  • Controlled Consistent Properties
  • No Free-Silica

United Abrasive Inc.

United Abrasive Inc. is an industrial supplier with over 80 years of experience in the abrasive industry that recycles high energy-consuming, synthetic abrasive grains otherwise destined for the landfill, to provide quality, cost-effective abrasive for our valued customers. We can satisfy your needs with our extensive line of grinding, cutting, and grit blasting products. Whether it's for an at-home hobbyist or a metal fabrication facility, we strive to provide products that get the job done right. Our unique knowledge of abrasives qualifies us to provide competent answers to your questions, and capable to supply you with the most efficient abrasive products, saving you time, money, and frustration.

We stock a complete line of blast media, for shipping in all grit sizes, including our Aluminum Oxide (Brown, White, Econoblast, Type "W"), Slag, Corn Cob, Silicon Carbide, Sinter Balls, Steel Shot, Steel Grit, Walnut Shells, Glass Beads, Crushed Glass, Baking Soda, and Plastic Media.