ULTRA X - 5,100lm PAR 36 LED REPLACEMENT LAMP
At up to 5,1000 lumens, the brightest and only GUARANTEED drop-in replacement PAR 36 LED on the market retailing for less than $350. The ULTRA X Series PAR36 high-performance replacement LED Spot/Landing are GUARANTEED NO-EXCUSES fit for ALL PAR36 Glass sealed beam bulbs.
Replaces ANSI bulb codes: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604
Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry. Continuously monitors and regulates internal temperatures to provide maximum output of up to 5,100 lumens, & protect from damaging heat to provide years of trouble-free performance.
Standard with PolyArmour Hardcoat lens protectant
- Exact PAR 36 Bulb dimensions for NO-EXCUSES fit.
- Powdercoated Housing for maximum environmental protection.
- Heavy duty brass screw terminals with 8-32 Stainless Steel Screws
- Constant brightness from 10-32VDC Input Voltage
SAFETY - EFFICIENCY - DURABILITY
WITHOUT COMPROMISE
Our light will take care of what's in front of you, BUT we've got your back!
* 100% Satisfaction, money back, guarantee *
SPECIFICATIONS:
Guaranteed EMI/RFI Free
WHY CHOOSE AERO-LITES?
— Regulated output means constant brightness with voltage fluctuation ( ie. battery voltage 12vdc; alternator output voltage 14.5vdc)
*Incandescent and Halogen bulbs will dim proportionally to the input voltage... So just when you expect your landing light to be the brightest... as you pull power to idle in your landing sequence (at night) the filament bulbs will dim below rated output because the generator (alternators may also) will decrease output or fall offline entirely due to the low RPM and high electrical system load!
— Guaranteed plug and play fit for ALL PAR 36 size housings.
— Extreme brightness for night landing and daytime recognition.
— Design lifespan rated in YEARS, not hours!
— Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment.
— Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition.
— No heat facilitate continuous use without fear of melted acrylic lens cover fairings.
— Less load on alternator/generator for increased service life.
— Less demand on battery for longer service life.
— Increased brake horsepower due to less load on the alternator/generator.
— Better fuel economy/longer range due to less load on alternator/generator.
ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth | Number of LEDs: 15pc
Input voltage: +10 to +32 VDC | Current: 4.0A @ 14vdc / 2.0A @ 28vdc (max) | Beam Pattern: 8° x 8°
Light Intensity: 5,100 Lumens | Color Temperature: 5,700k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powder coat | Lens Material: Shatterproof Polycarbonate
Wire Termination: 8/32 SAE screw terminals | Certifications: N/A
DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS
IN THE
USA
ULTRA X SERIES PAR 36 LED SEALED BEAMTAXI/FLOOD LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* 5,100 lumen high performance Aircraft Grade LED PAR36 Sealed Beam replacement lamp. No excuses fit that conforms to virtually all PAR36 critical parameters Including form, fit & function. Our customer base demands guaranteed no excuse fit, RFI/EMI-free aircraft grade components consistent with lamps many times the cost. Continuously variable current regulation as one of the brightest drop-in led replacement PAR 36 bulb in the market. By selling direct to consumers, we are able to offer this high performance lamp for a fraction of the cost of competitors, while providing industry leading in-house customer support. Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry.​ Applications: Aircraft Taxi, Agriculture, Heavy Equipment, Marine, Off-Road, Driving Lights, Rotating Beacons ​ Replaces ANSI Bulb Codes: Flood Beam: 4587, 4589, 4502, 4593, 4626, 4627, 4713, 4402A ---Exact PAR 36 Bulb dimensions for NO-EXCUSES fit. ---Geometric matrix heatsink design for maximum passive cooling. ---Powdercoated Housing for maximum environmental protection. ---Heavy duty brass screw terminals with 8-32 Stainless Steel Screws ---Constant brightness from 9-32VDC Input Voltage SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE Our light will take care of what's infront of you, BUT we've got your back! * 100% Satisfaction, money back, guarantee * Guaranteed EMI/RFI Free SPECIFICATIONS: The Aero-Form LED Advantage: Why choose our LEDs vs legacy sealed beams? ​ Safety No matter the application, our LED sealed beams are rated for continuous duty-cycle utilization, while emitting negligible radiant heat profile. This feature encourages operators to use the lamp without fear of damage to heat sensitive acrylic light covers, potential for personal injury from burns due to contact with the lamp, or worse case scenarios where collision accidents may compromise the glass envelope of filament style lamps and pose a fire hazard or even explosions if in proximity to volatile compound like fuel and other combustible chemicals.The brightness of LED lamps makes an optimum solution when the lamp is utilized as a signaling/recognition light. The extreme concentration of the light emitted from our lamps is consistent with that of the sun (similar to the reflection of the Sun on an object such as a mirror or reflective glass). This intense brightness is significantly more visible and significantly increases recognition even during the brightest daylight conditions. Our LED sealed beams are not affected by on/off power cycles and the instant illumination of the led when power is applied significantly increases visual stimulation toward the light source. This feature is critical for applications requiring the lamps to pulse/flash for enhanced recognition. *Data has proven that alternating flash patterns measurably reduce bird strike occurrences for aerial applications. ​ Efficiency Our LED direct replacement lamps exclusively feature genuine USA-made CREE chips and requires less than 1/5th of the power of the filament type lamps that they replace. This significant reduction in current makes available valuable electrical current for reduced load on charging systems and batteries, which ensures reserve electrical capacity for other critical appliances such as communication/navigation equipment.The light output of legacy sealed beams is a function of the input voltage. During low engine RPM conditions your charging system may not be able to sustain the required 14 or 28 volts required per the lamp specs, so your sealed beams lamps are likely producing much less than the spec'd light output. Our LED retrofit products feature constant current regulation and produce the same stable light output at any voltage as low as 10-Volts up to 30-Volts DC to eliminate degraded light output in low-voltage situations. ​ Durability Each sealed beam lamp we distribute features durable powder coated aluminum alloy heat sink housings for efficient heat dissipation and maximum protection from chemical, salt spray and moisture exposure.UV-resistant poly-carbonate lenses are virtually indestructible and can be cleaned and polished for years of trouble-free utilization. Epoxy potted heavy duty brass electrical terminals feature stainless steel SAE 8-32 thread wire termination screws to insure excellent mechanical bonding from the circuit wiring to the lamp input terminals. Where many legacy sealed beams are factory rated at 25 hours service life in the most ideal situation, our LED replacements will likely outlive the vehicle on which it is installed considering their design service life exceeding 10,000 hours. Since our LED are not affected by vibration, you will eliminate the aggravation of premature lamp failures and the expense of repetitive replacement of burned out lamps. ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth Input voltage: +9 to +32 VDC | Current: 4.0A @ 14vdc / 2.0A @ 28vdc (max) | Beam Pattern: 45° x 10° Light Intensity: 5,100 Lumens | Color Temperature: 5,700k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate Wire Termination: 8/32 SAE screw terminals | Certifications: NOT FAA-PMA APPROVED DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA ULTRA PAR 36 LED REPLACEMENT TAXI/FLOOD LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* At up to 3,2000 lumens, the brightest and only GUARANTEED drop-in replacement PAR 36 LED on the market retailing for less than $350. And virtually TWICE the lumens compared to Whelen's Parmetheus Plus (1,700lm) The ULTRA GEN2 Series PAR36 high-performance replacement LED Spot/Landing are GUARANTEED NO-EXCUSES fit for ALL PAR36 Glass sealed beam bulbs. ​​​​​​​Replaces ANSI bulb codes: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604 Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry. Continuously monitors and regulates internal temperatures to provide maximum output of up to 3,000 lumens, & protect from damaging heat to provide years of trouble-free performance. ---Exact PAR 36 Bulb dimensions for NO-EXCUSES fit. ---Geometric matrix heatsink design for maximum passive cooling. ---Powdercoated Housing for maximum environmental protection. ---Heavy duty brass screw terminals with 8-32 Stainless Steel Screws ---Constant brightness from 9-32VDC Input Voltage​​​​​​​ SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE Our light will take care of what's infront of you, BUT we've got your back! * 100% Satisfaction, money back, guarantee * SPECIFICATIONS: Guaranteed EMI/RFI Free ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth | Number of LEDs: 12pc 5watt CREE XP-E2 Input voltage: +9 to +32 VDC | Current: 2.80A @ 14vdc / 1.45A @ 28vdc (max) | Beam Pattern: 10° x 10° Light Intensity: 3,200 Lumens | Color Temperature: 5,700k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate Wire Termination: 8/32 SAE screw terminals | Certifications: N/A WHY CHOOSE AERO-LITES? — Regulated output means constant brightness with voltage fluctuation ( ie. battery voltage 12vdc; alternator output voltage 14.5vdc) *Incandescent and Halogen bulbs will dim proportionally to the input voltage... So just when you expect your landing light to be the brightest... as you pull power to idle in your landing sequence (at night) the filament bulbs will dim below rated output because the generator (alternators may also) will decrease output or fall offline entirely due to the low RPM and high electrical system load! — Guaranteed plug and play fit for ALL PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — Design lifespan rated in YEARS, not hours! — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* The ONLY true drop-in replacement LED Landing light on the market retaiing less than $400. With well over 8,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs now in service around the globe, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. ​ MEET THE BRAND NEW SUNSETTER ULTRA G2 ​ Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry. Fly confidently with 3,000 effective lumens lighting your way. Continuously variable current regulation affords you the brightest drop-in led replacement PAR 36 bulb in the market for less that $350.00 ​ Powdercoated Housing, 8-32 brass screw terminals. *No-Excuses GUARANTEED fit for all PAR36 Aircraft Fixtures. ​ SPECIFICATIONS: Guaranteed EMI/RFI Free ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth | Number of LEDs: 12pc 5watt CREE XP-E2 Input voltage: +9 to +32 VDC | Current: 2.80A @ 14vdc / 1.45A @ 28vdc (max) | Beam Pattern: 15° x 15° Light Intensity: 3,000 Lumens | Color Temperature: 6,000k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations. — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* SPECIFICATIONS: With over 6,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs in service worldwide, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. The Sunsetter ULTRA Series is all these things and more. THE BRIGHTEST LED PAR 36 LANDING LIGHT FOR LESS THAN $200, GUARANTEED. SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 12pc 5watt CREE XP-E Input voltage: +10 to +30 VDC | Current: 1.35A @ 14vdc / 0.69A @ 28vdc | Beam Pattern: 15° x 15° Light Intensity: 2,600 Lumens | Color Temperature: 6,000k | Weight: 0.75 lbs | Design life: >20,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations (visit our website) — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* SPECIFICATIONS: With over 6,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs in service worldwide, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. The Sunsetter ULTRA Series is all these things and more. THE BRIGHTEST LED PAR 36 LANDING LIGHT FOR LESS THAN $200, GUARANTEED. SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 12pc 5watt CREE XP-E Input voltage: +10 to +30 VDC | Current: 1.35A @ 14vdc / 0.69A @ 28vdc | Beam Pattern: 15° x 15° Light Intensity: 2,600 Lumens | Color Temperature: 6,000k | Weight: 0.75 lbs | Design life: >20,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations (visit our website) — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* The ONLY true drop-in replacement LED Landing light on the market retaiing less than $400. With well over 8,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs now in service around the globe, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. ​ MEET THE BRAND NEW SUNSETTER ULTRA G2 ​ Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry. Fly confidently with 3,000 effective lumens lighting your way. Continuously variable current regulation affords you the brightest drop-in led replacement PAR 36 bulb in the market for less that $350.00 ​ Powdercoated Housing, 8-32 brass screw terminals. *No-Excuses GUARANTEED fit for all PAR36 Aircraft Fixtures. ​ SPECIFICATIONS: Guaranteed EMI/RFI Free ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth | Number of LEDs: 12pc 5watt CREE XP-E2 Input voltage: +9 to +32 VDC | Current: 2.80A @ 14vdc / 1.45A @ 28vdc (max) | Beam Pattern: 15° x 15° Light Intensity: 3,000 Lumens | Color Temperature: 6,000k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations. — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* SPECIFICATIONS: With over 6,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs in service worldwide, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. The Sunsetter ULTRA Series is all these things and more. THE BRIGHTEST LED PAR 36 LANDING LIGHT FOR LESS THAN $200, GUARANTEED. SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 12pc 5watt CREE XP-E Input voltage: +10 to +30 VDC | Current: 1.35A @ 14vdc / 0.69A @ 28vdc | Beam Pattern: 15° x 15° Light Intensity: 2,600 Lumens | Color Temperature: 6,000k | Weight: 0.75 lbs | Design life: >20,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations (visit our website) — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* SPECIFICATIONS: With over 6,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs in service worldwide, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. The Sunsetter ULTRA Series is all these things and more. THE BRIGHTEST LED PAR 36 LANDING LIGHT FOR LESS THAN $200, GUARANTEED. SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 12pc 5watt CREE XP-E Input voltage: +10 to +30 VDC | Current: 1.35A @ 14vdc / 0.69A @ 28vdc | Beam Pattern: 15° x 15° Light Intensity: 2,600 Lumens | Color Temperature: 6,000k | Weight: 0.75 lbs | Design life: >20,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations (visit our website) — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, Satisfaction Guarantee / Feedback Our 100% feedback score is very important to us. If for some reason you are not satisfied with your purchase please don't hesitate to contact us and get the issue resolved prior to leaving feedback. ---If you are satisfied, please help us to expand our eBay presence by taking a minute to leave feedback regarding your recent purchase. What we mean by our "DROP-IN REPLACEMENT GUARANTEE": it is understandable that out of the thousands of aircraft models soaring the skies, there is bound to be a few that the light housing WILL NOT facilitate our PAR 36 LED replacements. Historically, the most common fitment issue arises when the diameter of the aircraft's light housing is slightly too small to allow the aluminum heat sinks on the rear of the LED light to penetrate. Thus, the light will not seat fully into the housing. These instances are few and far between but DO NOT WORRY! WE GUARANTEE THAT: SHOULD YOUR PLANE BE ON THIS "SHORT LIST" AND OUR LIGHT WILL NOT DROP IN AS A REPLACEMENT, YOU HAVE THE OPTION TO RETURN THE UNDAMAGED LAMP WITHIN 30 DAYS FOR ABSOLUTELY NO MONEY OUT OF POCKET. ALL YOU LOSE IS YOUR TIME. THAT, WE FEEL IS FAIR, AND IS A RISK WORTH TAKING! Drop-in replacement for: GE 4509, GE 4700, GE Q4631, GE 4313, GE 4502, GE 4627, GE 4626, GE 4589, GE 4593. GE 4591, GE 4594, GE 4713, GE 4587, GE 4505, GE 4596, GE 7604, GE 4631, ULTRA PAR 36 LED REPLACEMENT TAXI/FLOOD LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* At up to 3,2000 lumens, the brightest and only GUARANTEED drop-in replacement PAR 36 LED on the market retailing for less than $350. And virtually TWICE the lumens compared to Whelen's Parmetheus Plus (1,700lm) The ULTRA GEN2 Series PAR36 high-performance replacement LED Spot/Landing are GUARANTEED NO-EXCUSES fit for ALL PAR36 Glass sealed beam bulbs. ​​​​​​​Replaces ANSI bulb codes: 4505, 4509, 4509X, 4509Y, Q4509, Q4631, Q4632, 4313, 4591, 4594, 4595, 4596, 4713, H7604 Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry. Continuously monitors and regulates internal temperatures to provide maximum output of up to 3,000 lumens, & protect from damaging heat to provide years of trouble-free performance. ---Exact PAR 36 Bulb dimensions for NO-EXCUSES fit. ---Geometric matrix heatsink design for maximum passive cooling. ---Powdercoated Housing for maximum environmental protection. ---Heavy duty brass screw terminals with 8-32 Stainless Steel Screws ---Constant brightness from 9-32VDC Input Voltage​​​​​​​ SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE Our light will take care of what's infront of you, BUT we've got your back! * 100% Satisfaction, money back, guarantee * SPECIFICATIONS: Guaranteed EMI/RFI Free ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth | Number of LEDs: 12pc 5watt CREE XP-E2 Input voltage: +9 to +32 VDC | Current: 2.80A @ 14vdc / 1.45A @ 28vdc (max) | Beam Pattern: 10° x 10° Light Intensity: 3,200 Lumens | Color Temperature: 5,700k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate Wire Termination: 8/32 SAE screw terminals | Certifications: N/A WHY CHOOSE AERO-LITES? — Regulated output means constant brightness with voltage fluctuation ( ie. battery voltage 12vdc; alternator output voltage 14.5vdc) *Incandescent and Halogen bulbs will dim proportionally to the input voltage... So just when you expect your landing light to be the brightest... as you pull power to idle in your landing sequence (at night) the filament bulbs will dim below rated output because the generator (alternators may also) will decrease output or fall offline entirely due to the low RPM and high electrical system load! — Guaranteed plug and play fit for ALL PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — Design lifespan rated in YEARS, not hours! — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* The ONLY true drop-in replacement LED Landing light on the market retaiing less than $400. With well over 8,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs now in service around the globe, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. ​ MEET THE BRAND NEW SUNSETTER ULTRA G2 ​ Advanced SmarTemp Technology - Proprietary temperature-dependent intensity decrement circuitry. Fly confidently with 3,000 effective lumens lighting your way. Continuously variable current regulation affords you the brightest drop-in led replacement PAR 36 bulb in the market for less that $350.00 ​ Powdercoated Housing, 8-32 brass screw terminals. *No-Excuses GUARANTEED fit for all PAR36 Aircraft Fixtures. ​ SPECIFICATIONS: Guaranteed EMI/RFI Free ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.20" depth | Number of LEDs: 12pc 5watt CREE XP-E2 Input voltage: +9 to +32 VDC | Current: 2.80A @ 14vdc / 1.45A @ 28vdc (max) | Beam Pattern: 15° x 15° Light Intensity: 3,000 Lumens | Color Temperature: 6,000k | Weight: 0.70 lbs | Design life: >10,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations. — Guaranteed plug and play fit for all PAR 36 size housings. — Extreme brightness for night landing and daytime recognition. — 20,000hr average service life. — Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. — Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. — No heat facilitate continuous use without fear of melted acrylic lens cover fairings. — Less load on alternator/generator for increased service life. — Less demand on battery for longer service life. — Increased brake horsepower due to less load on the alternator/generator. — Better fuel economy/longer range due to less load on alternator/generator. DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA SUNSETTER - ULTRA PAR 36 LED REPLACEMENT LANDING LIGHT *NOTAM: Price is no longer a barrier to converting your aircraft lighting to cutting-edge LED technology* SPECIFICATIONS: With over 6,000 of our SunSetter Series PAR 36 LED Landing & Taxi bulbs in service worldwide, you can rest assured that we know what you want in a high-performance; yet affordable sealed beam LED replacement lamp for your aircraft. Just like us, you demand guaranteed no excuse fit, aircraft grade components consistent with "big box" brands, extreme brightness, low current draw, no heat, and a design life that will outlive us all. The Sunsetter ULTRA Series is all these things and more. THE BRIGHTEST LED PAR 36 LANDING LIGHT FOR LESS THAN $200, GUARANTEED. SAFETY - EFFICIENCY - DURABILITY WITHOUT COMPROMISE ANSI Spec: PAR 36 | Dimensions: 4.38" dia x 1.38" depth | Number of LEDs: 12pc 5watt CREE XP-E Input voltage: +10 to +30 VDC | Current: 1.35A @ 14vdc / 0.69A @ 28vdc | Beam Pattern: 15° x 15° Light Intensity: 2,600 Lumens | Color Temperature: 6,000k | Weight: 0.75 lbs | Design life: >20,000hr Housing Material: Aluminum Alloy | Finish: Black Powdercoat | Lens Material: Shatterproof Polycarbonate WHY CHOOSE AERO-LITES? — FREE downloadable "Approved Technical Data" to facilitate ONE-TIME STC's for PART-23 Aircraft Installations (visit our website) — Guaranteed plug and play fit for all PAR 36 siz