Additive Pro-tec DPF/Catalyst Cleaner

Slide
$42.04
Brand
Pro-tec
condition
New

Additive Pro-tec Detergent DPF / Catalyst

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


Description

The DPF / Catalyst Cleaner dissolves and removes all contamination and soot residue from the diesel particulate filter and catalyst, without the need for disassembly. The product eliminates any decrease or interruption in performance caused by contaminated particulate filters and catalysts. DPF / Catalyst Cleaner restores the full function of the diesel particulate filter and catalyst.

The product is also ideal for cleaning the EGR valve.
- Dissolves and removes contamination in the diesel particulate filter and catalyst.
- Cleans without disassembling
- Evaporate without residues

Application area

Cleaning the diesel particulate filter and catalytic converter.

Application nodes

Warning: the engine must be hot. Shake the can well before use! (about 1 minute)

Remove the temperature, pressure or access sensor on the DPF/catalyst and insert the probe through the opening. Spray the cleaner with the inserted probe into the diesel particulate filter/catalyst at 5 second intervals until the DPF/catalyst is adequately filled with foam. Close the opening after application. Once the cleaner has been applied, the deposits are released and dispersed in the diesel particulate filter/catalytic converter. During normal engine operation, microfine dirt particles burn off. Restart the regeneration process via a workshop tester. Finally remove the faulty memory entry or clear existing errors. Then carry out a test drive lasting about 20 minutes.

DPF / Catalyst Cleaner can be used for all closed particle filter systems. Check the oil level before cleaning. Oil change is necessary if oil dilution is done with diesel.

For an optimized regeneration in diesel engines it is recommended to add the PRO-TEC DPF Super Clean (P6171 DPF SC) in the fuel tank after performing the test drive. For petrol engines we recommend PRO-TEC OXICAT (P1180) .

Consumption

Sufficient for one application/diesel particulate filter/catalyst.

Treatment time

It works while applying

The DPF / Catalyst Cleaner dissolves and removes all contamination and soot residue from the diesel particulate filter and catalyst, without the need for disassembly. The product eliminates any decrease or interruption in performance caused by contaminated particulate filters and catalysts. DPF / Catalyst Cleaner restores the full function of the diesel particulate filter and catalyst. Remove the temperature, pressure or access sensor on the DPF/catalyst and insert the probe through the opening. Spray the cleaner with the inserted probe into the diesel particulate filter/catalyst at 5 second intervals until the DPF/catalyst is adequately filled with foam. Close the opening after application. Once the cleaner has been applied, the deposits are released and dispersed in the diesel particulat
The DPF / Catalyst Cleaner dissolves and removes all contamination and soot residue from the diesel particulate filter and catalyst, without the need for disassembly. The product eliminates any decrease or interruption in performance caused by contaminated particulate filters and catalysts. DPF / Catalyst Cleaner restores the full function of the diesel particulate filter and catalyst. Remove the temperature, pressure or access sensor on the DPF/catalyst and insert the probe through the opening. Spray the cleaner with the inserted probe into the diesel particulate filter/catalyst at 5 second intervals until the DPF/catalyst is adequately filled with foam. Close the opening after application. Once the cleaner has been applied, the deposits are released and dispersed in the diesel particulat
MPN Non applicabile
Marca Pro-tec