|
Angle Positioning Acrylic Hot Bender Plastic Pvc Profile Bending Machine |
|
|
|
 |
| Attention |
1. Machine should be placed in dry, clean, ventilated
position, the operation of the machine placed in a horizontal position and
smooth. Keep away from flammables and explosives.
2.For safety reasons, must
be connected to a reliable safety grounding device must have three feet with
ground connection.
3. The heating process leads to high temperature, so avoid
contacting the heating area with fingers or skin.
4. Unplug the power
cable/cord, if the machine will not be used in a long time. |
| Description |
- The acrylic bending machine heater is the core part of bending
machine. You can assemble various kinds of ideal practical acrylic bender with
this heater.
1.Processing Material: Acrylic, Plastic, PVC,
Plexiglass.
2.Used for: This acrylic bending machine heater can be widely
used in decoration engineering, sign making, display cabinet, aquarium wrapping,
lighting LED channel letter, bending the supermarket shelves, curtain wall,
large light box, acrylic plates and plastic plates.
3.The acrylic bending
machine heater can bend all kinds of plastic sheet. If the thickness of acrylic
sheet is beyond 6mm, you can use two heaters heat the top and bottom of the
sheet at the same time, or you need to cut a slot on the sheet.
4.You can
also use many acrylic bender heaters to heat more bents at the same time.
|
| Parameter |
- Voltage: 110V
Frequency: 50/60Hz
Power:
800W
- Other model selection：300W/1500W/2000W
- Maximum heating Width:23.62in(600mm)
- Other model
selection:11.81in(300mm)/48.03in(1220mm)/70.87in(1800mm)
- Heating Thickness:within0.24" (6mm)
- Angle plate length:21.65in(55cm)
- Package Type： Cardboard Box
- Please note that the cooling water temperature should
not exceed 40 ℃.
|
| Feature &
Advantage |
- 1.Reasonable design, small size, compact structure and
beautiful appearance.
2.Heat even and temperature adjustable.
3.With
circulating cooling water system on both sides of heating pipe.
4.Power
supply joint and water pipe joint are at the same end.
5.The body is made of
special aluminum extrusions.
6.Portable, small occupation, low consumption
and reliable operation.
7.Light and practical with low cost,
value-priced.
8.Circulating cooling water system can make sure other parts
(no heating is required) won't get thermal deformation.
9.Free plugging and
unplugging, easy to storage and assembles to worktable very
conveniently.
|
| Recommended temperature for
some regular materials |
Acrylic: 210℃
Perspex: 195℃
PVC sheet:
155℃
ABS: 190℃
PET: 160℃
NOTE: Just for reference, and users may modify
them according to their materials and working habits. |
 |
|
|
| Operation and installation video
|
|
https://youtu.be/ho_EnaGmOds
|
