4 Ton 14.5 SEER2 & 132K BTU 80% Central Air Split AC & Gas Furnace System Kit
FREE SHIPPING - Great Pricing
Backed by the most knowledgeable staff in the business:
We know HVAC so you don't have to.
Compares to Carrier, Heil, Tempstar, Bryant, Comfortmaker, & other ICP Brands!
Same Great Quality & Warranty as Name Brands at a Lower Price.
ACiQ is made in the same factory and at the same specs with the same warranty as other name-brands. We are able to offer it to you at a special low pricing - and FREE SHIPPING. You're getting the same great quality for less. (Think of it like buying a car: Chevy vs. GM...)
This is our System Builder Kit, so you can put together a system that works best for you easily, all with our everyday low pricing. Choose an optional installation kit that would best fit your install to save time and money on necessary accessories-- Be prepared!
SEER Notice: The system SEER can be different from the condenser SEER, the true SEER rating achieved depends on the system as a whole and not just the condenser. We advertise the true SEER of the system and this can be verified with the AHRI number provided in the specs.
Every Order Includes:
- 1x ACiQ Air Conditioning Condenser
- 1x ACiQ Multi-Positional Gas Furnace
- 1x ACiQ Evaporator Coil
Please Note:
- The furnace in this listing CANNOT be shipped or sold to California; contact us for a Quote!
- If you're unsure of sizing or need help selecting the proper system; send us a message and we'd be happy to help!
- Looking to add or adjust any accessory items? We also carry plenums, filters, condensate pumps and more!
- If you do not add an installation kit you will only receive the units themselves (and LP Kit if Propane Gas Type is selected)
Optional Installation Kit Includes:
- 30ft or 50ft of Insulated Copper Line Set
- Condenser Electrical Wire Whip
- Condenser Outdoor Equipment Pad
- Disconnect Switch 60A Non Fuse
- 1H/1C Non-Programmable Thermostat
ACIQ A/C CONDENSER / GAS FURNACE / EVAP COIL OVERVIEW
Air Conditioning Condenser Overview
R4A5S Series
The ACiQ R4A5S is a standard AC-only condenser. Designed with comfort in mind and an inexpensive option for nearly any application, this condenser is considered a good all-around option for almost any application. The R4A5S AC-only air conditioner can achieve 14.3 or higher SEER2 in efficiency when paired with the proper equipment. As the standard efficiency on the market for all states, this unit is average in efficiency. Every SEER point is 5-7% more efficient than the one lower than it, saving you money the higher the SEER rating of the unit. Please note that this product is regulated by DOE Efficiency Standards.
QUICK FACTS
- 14.3 SEER2 AC-only condenser
- Fully charged for up to 15' of line set
- Single stage compressor
- Filter drier included to be field-installed
The R4A5S ACiQ AC condenser cabinet has a pre-painted finish over galvanized-steel, and features a copper tube coil with aluminum fins. Moreover, the unit is equipped from the factory with a two-screw access control panel and high & low external refrigerant valves meaning the unit is easy to access for service. A external filter dryer comes with ever unit, which lowers general wear-and-tear on the unit. The R4A5S provides peace of mind thanks to its durability and ease of service enhancements; along with featuring ACiQ's standard 10 year parts warranty with online registration through the manufacturer. An installation that follows your state and local codes is required for the warranty to be upheld on all ACiQ products.
The cabinet of ACiQ units are extremely durable. On the R4A5S, there are reinforced corner posts and the internals of the unit are protected by an additional inlet grille, all to provide enhanced protection to the unit.
Gas Furnace Overview
N80ESN Series
The ACiQ N80ESN is an inexpensive model of furnace to provide reasonable comfort to your home. At a basic efficiency, this furnace will heat your home adequately with the right output, providing comfort to your home even in the coldest parts of the year. The N80ESN ACiQ gas furnace is 80% efficient, and the standard furnace efficiency on the market today. The 80% AFUE also means that for the gas going into the furnace, 80% of it is used to heat your home while the remaining 20% is lost out the flue piping and lost to normal furnace operations
QUICK FACTS
- Requires metal flue venting
- Can be converted to an LP furnace with a AGAGC8NPS01A conversion kit; Conversion kit is included if you select Propane as your gas type
- Direct ignition with Silicon Nitride Ignitor
- RPJ aluminized steel heat exchanger
- Multi-positional design; can be installed in the upflow, downflow, or horizontal orientations
- On-board Self-Diagnostics
The ACiQ brand has improved technology from years of production experience, allowing for a long-lasting product that rarely has any issues. However, if something does go wrong on the furnace, the N80ESN control board has a set of sensors that allow it to diagnose basic issues, allowing for easy troubleshooting. Including flame roll-out sensors, blower delays, high temperature limit sensors, and a blocked vent switch. This increases the overall safety of the unit, for the furnace itself and the occupants of the home where it is installed. ACiQ offers 10 year parts warranty and lifetime (20 year) heat exchanger limited warranty on the N80ESN models when registered with the manufacturer within 90 days of installation. An installation that follows your state and local codes is required for the warranty to be upheld on all ACiQ products.
The heavy-gauge, one-piece steel cabinets on ACiQ furnaces provide sturdy protection that can withstand wear-and-tear through its entire lifetime, providing the peace of mind that your home will stay comfortable year-round. The cabinet on the N80ESN furnace is also more air-tight than previous models; paired with the in-shot burners, this allows for a quiet, more economical unit due to less heat loss and preventing more sound from exiting the unit. The value of ACiQ furnaces doesn't end at efficiency and diagnostic upgrades! The N80ESN also offers two additional terminals for an external humidifier and electric air cleaner; available at an additional price.
California Residents: This furnace does not comply with CA Low NOx or Ultra-Low NOx regulations. If you have any questions or would like a quote for a compliant system, please contact us.
Evaporator Coil Overview
EVD4X & EAM4X Series
ACiQ takes pride in its ability to provide a high-quality system, including all system components. Leaving no exception, the EVD4X & EAM4X coils are a superior option for almost any application while maintaining the entire unit's efficiency with a factory-integrated TXV kit for enhanced energy optimization. With its unique performance features, these coil is a superior option for your home's comfort. In some system configurations, this coil may be larger in tonnage than its paired condenser. This is intentional, to maintain the overall efficiency of the entire system.
The EVD4X & EAM4X model coils feature aluminum tubing and fins with copper stubs for field connection. They are also built for durability, the cabinet is made of a sturdy pre-painted steel; made to specifically prevent sweating even in extreme conditions. They also feature two condensate drain connections to fit just about any install. If you ever need to perform maintenance on your coil, there is a removable front access panel for easy internal access. ACiQ offers a 10 year parts warranty on their coils when they are installed following your state and local codes, as well as the system is paired with a certified system matchup. An installation that follows your state and local codes is required for the warranty to be upheld on all ACiQ products.
ACiQ Coils have foil-faced insulation which increases the amount of air flow going into your ductwork by lowering air leakage. This decreases the systems run time, while keeping your home more comfortable.
SYSTEM SPECIFICATIONS
Vertical - 24.5" Wide // 14.5 SEER2 - AHRI # 208720719
Upflow / Downflow ONLY
System Model Numbers: R4A5S48AKAWA / N80ESN1352420A / EVD4X61M24A
| 4 Ton 13.8 SEER2 ACiQ Air Conditioner Condenser | |
|---|---|
| SKU | R4A5S48AKAWA |
| Weight (in lbs) | 198.000000 |
| Brand/Manufacturer | ACiQ |
| Replaces | R4A448GK, R4A548GK |
| Equivalent | Carrier Equivalent: 24ACC448A003 |
| Cooling BTU | 48,000 |
| Maximum CFM | 1435 |
| Decibel Level (dBA) | 76 |
| Motor RPM | 1100 |
| Horsepower | .25 |
| Energy Star | Yes |
| SEER2 (Efficiency) | 13.8 |
| Condenser Stages | Single Stage |
| Compressor Type | Scroll |
| Liquid Valve Size | 3/8" |
| Suction Valve Size | 7/8" |
| Electrical | 208 / 230 V. 1 Phase 60 Hz |
| Max Breaker Size | 50 Amps |
| Min. Breaker Size | 32.8 Amps |
| Amperage Requirement | 50 Amps |
| Tonnage | 4 Ton |
| Height | 31 11/16" |
| Width | 31 3/16" |
| Depth | 32 3/16" |
| Warranty | 10 Year Parts with Online Registration |
| 132,000 BTU 80% AFUE Single Stage Multi-Positional ACiQ Gas Furnace | |
|---|---|
| SKU | N80ESN1352420A |
| Weight (in lbs) | 167.000000 |
| Exhaust Flue Requirement | Metal |
| Brand/Manufacturer | ACiQ |
| Equivalent | Carrier Equivalent: 58SB0A135E24--20 Tempstar Equivalent: TN80ESN1352420A Bryant Equivalent: 810SA60135E24 |
| Furnace Efficiency / AFUE | 80% |
| Heating BTU | 132,000 |
| Blower Motor | Multi-Speed ECM |
| Drive Type | Direct |
| Maximum CFM | 1810 |
| Motor RPM | 1050 |
| Horsepower | .75 HP |
| Configuration | Upflow/Downflow/Horizontal |
| Exhaust Pipe | Metal |
| Electrical | 115v 1 Phase 60 Hz |
| Phase | Single Phase |
| Max Breaker Size | 15 Amps |
| Connection | 1/2" NPT |
| Maximum Inlet Pressure | 13.6"wc |
| Burner Stages | Single |
| Ignition Type | Direct Ignition with Silicon Nitride Hot Surface Ignitor |
| Fuel Type | Natural Gas |
| Certification | AHRI Certified |
| Height | 33 1/3" |
| Width | 24 1/2" |
| Depth | 29" |
| Warranty | 20 Year Heat Exchanger and 10 Year Parts with Online Registration |
| ACiQ 5 Ton 24.5" Width AC-Only Vertical Evaporator Cased Coil | |
|---|---|
| SKU | EVD4X61M24A |
| Weight (in lbs) | 64.000000 |
| Brand/Manufacturer | ACiQ |
| Replaces | END4X61L24A |
| Equivalent | Carrier Equivalent: CNPVP6124ALA Tempstar Equivalent: END4X61L24A Bryant Equivalent: CNPVP6124ALA |
| Configuration | Upflow / Downflow |
| Liquid Line | 3/8" |
| Suction Line | 3/4" |
| Tonnage | 5 Ton |
| Style | |