A/C Compressors 198353 Fits 2004-2012 Chevrolet Colorado GMC Canyon

Feature & Details:
【PREMIUM ALUMINUM MATERIAL】- This ac air compressor is a replacement compressor and clutch. Its main body is made of high-strength aluminum material, which is durable, rigid, and wearable. It will not crack, break, or leak. Such high-quality ensures a long-time use for each compressor kit.
【STRONG COOLING FUNCTION】- The auto ac compressor can provide sufficient pressure, which increases power force and decreases engine load. It dramatically improves the cooling function: features as high and stable efficiency, safety, and reliability.
LOW NOISE & LOW FUEL CONSUMPTION】- AC compressor works excellent and has low noise with a better experience. With a lower load factor, low power will be input when driving at high speed, which increases fuel economy and makes operation smoothly.
【FULLY TESTED & EASY INSTALLATION】- The ac compressor clutch has been examined and tested carefully before its delivery. And the kit without refrigeration oil inside, be aware of it when starting your installation and replacement. If you need to add oil after a long time use, please add pure refrigerant, and should not be added to too much, 70-80% is appropriate.

Fitment:
2004-2012 Chevrolet Colorado

2004-2012 GMC Canyon

2006-2010 Hummer H3

2007-2008 Isuzu i-290, i-370

2006 Isuzu i-280, i-350

2009-2010 Hummer H3T

Package Including:
1x A/C Compressor 198353

Installation Method:
1.Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
2.Flush the condenser and evaporator using NON-OIL BASED A/C flush. On expansion valve systems. The valve must be removed before the evaporator can be flushed. Flushed condensers from outlet to inlet and evaporators from inlet to outlet.
3.Drain all the oil from the new compressor and dispose of according to local, state and federal laws.
4.Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
5.Install new receiver drier or accumulator and new orifice tube or expansion valve.
6.Evacuate the A/C system for a minimum of one hour.
7.After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
8.Start engine whit A/C controls on MAX AIR with door and windows open.
9.Add the remaining charge of refrigerant as called for by the manufacture.