- Easy to Use 2 part hand moldable epoxy putty hardens in 50-60 minutes with final steel hard cure in 12 hours
- Can cure underwater
- Use for pool and SPA repairs (plaster, gunite or fiberglass), Boats, RV, Auto, at work and around the house
- Use on all types of plumbing fixtures and ceramics, tubs, toilets, sinks, tiles, caulking, fiberglass, sculpture, taxidermy, doll repair, carving, metal, pump housing, pool decks and broken tiles
- Made in the USA
A+B Epoxy putty 14.0 oz. Is an easy-to-use, two part putty you
simply mix and mold like clay - no complicated weighing or measuring
required. Easy 1:1 cut what you need mix ratio, form it into any shape.
It hardens in one hour and makes a final, steel-hard cure in 12 hours.
Can cure under water. Provides a durable and permanent bond to:
fiberglass, concrete, Brick, stone, glass, porcelain, Tile, ceramics,
pottery, metal, copper, chrome, iron, wood, most PVC and countless other
materials. Mixing and handling: make sure the application surface is
free of gas, grease, oil, rust, dirt, and other debris. Roughing or
sanding the surface is recommended. Mold the epoxy to the approximate
shape of the repair and apply firmly, sealing and smoothing thoroughly
and securely. Using rezolin a + b epoxy putty is amazingly easy, simply
cut off equal parts of the a + b bars. Knead and roll in your hands or
on a clean working surface until the colors merge. Make sure there are
no streaks. Gloves are advisable for mixing and molding the putty
products. Rubbing water on the surface will yield a professionally
looking smooth surface. Let it harden and cure for the specified time:
one hour hardening and 12 hour curing time for regular a + b epoxy.
Clean all tools, reusable gloves, and hands, if necessary, with soap and
warm water immediately after use. Some suggested uses: fill cracks or
holes in decks and broken tiles - cures under water fill cracks and
holes in pool or spa and underwater plumbing, pumps and drains - no
draining required repair breaks, cracks or leaks in all types of
plumbing fixtures and ceramics - tubs, toilets, sinks, tiles, caulking
seals leaks in gasoline tanks and air conditioner systems repair all
types of fiberglass cracks, holes and breaks insulating cable splices.
Can be drilled and sanded once fully cured. Putty that is cold or below
70F will be harder to mix because it is stiffer and will take a little
longer to set. Putty that is above 90F will be easier to mix because it
is softer, but it and will have a shorter work life and will set in a
shorter amount of time. Expect a steel hard cure overnight with the
regular set putty and in about 3 - 5 hours with the fast set putty.