9391 KB Electronics SCR Variable Speed DC Motor Drive, Black, KBPC-225D, 1.5HP @ 115VAC / 3HP @ 230VAC, 90/180VDC Motors, NEMA 4X, IP65, Washdown & Watertight

Description

The KBPC Series NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control is designed for applications requiring washdown watertight integrity. Its housing is ruggedly constructed of die cast aluminum which is protected with an acrylic coating for the ultimate in corrosion resistance. All switches are sealed with rubber boots and the main speed potentiometer contains a shaft seal.
The KBPC state-of-the-art electronics include short circuit and transient protection to provide the ultimate in reliability. Electronics overload protection is also provided which prevents motor burnout and demagnetization of PM motors. The control can be operated in either the speed or torque mode via a jumper selection. The current range, which is also jumper selectable, eliminates the necessity for calibration of IR compensation and current limit for most applications. The KBPC also contains jumper selections for AC line voltage (230/115), DC armature voltage (180/90) and feedback type (armature/tachometer).
Standard features include Electronic Start/Stop and LED Indicator Array for “Power On,” “Stop” and “Overload.”

Standard Features

Electronic Overload Protection
LED’s for “Power On,” “Overload” and “Stop”
Electronic Start-Stop

Specifications

Manufacturer
KB Electronics

Model Number
KBPC-225D, Black

Part Number
9391

Input Line Voltage
115/208-230 VAC (+/-10%) 50/60Hz

Motor Voltage
0-90 VDC @ 115VAC0-90, 0-180VDC @ 230VAC

Maximum AC Load Current
22 RMS Amps

Maximum DC Load Current
15 DC Amps

Maximum Power
1.5HP (1.13kW) @ 115VAC3 HP (2.25 kW) @ 230VAC

UPC
024822093910

Weight
5 lbs

Warranty
18 month

ACCEL and DECEL Ranges
0.1-15 Seconds

MIN SPEED Range
0-30 % Base Speed

MAX SPEED Range
60-120 % Base Speed

IR COMP Range
0-30VDC @ 230VAC Line

CL Range
0-180 % Range Setting

TIMED CL Range
0.5-15 Seconds

Voltage Following Linearity
+/-0.5 % Base Speed

Horsepower Range
1.5HP (1.13kW) @ 115VAC Line3HP (2.25kW) @ 230VAC Line

Armature Voltage Range
0-200VDC @ 230 VAC Line

Field Voltage
200/100VDC @ 230 VAC Line

Ambient Temperature Range
0-45°C

Speed Range
50:1 Ratio

Load Regulation, Armature Feedback
+/- 1 % Base Speed

Load Regulation, Tachometer Feedback
+/- 1 % Base Speed

Jumper Selectable Features

Control Mode: Speed, Torque
AC Line Voltage (VAC-50/60 Hz): 115, 230
DC Armature Voltage (VDC): 90, 180
Feedback Type: Armature, Tachometer
Tachometer Voltages (VDC): 7, 20/30, 50
(per 1,000 RPM)
Timed Current Limit: TCL, NTCL

Bold Denotes Factory Setting

Trimpot Adjustments

Minimum Speed (MIN)
Current Limit (CL)
Acceleration (ACCEL)
Timed Current Limit (TCL)
Maximum Speed (MAX)
IR Compensation (IR)
Deceleration (DECEL)
Jog Speed (JOG)