Exactly the parts shown in the picture. Axles, PA20set bearings installed, axle retainers, t-bolts and 1/2" wheel studs.
- Big bearing 9" Ford Axle with 2.5" brake spacing.
- Flanged 31 spline axle has 3.15" tapered bearing installed
- Axles have inches of inner spline and you can cut the axle down to 2" of inner spline as the minimum.
- Long Axle is 33" long with 9.25 inches of inner spline. (Shortest usable length with 2" of minimum spline is 25.75")
- Axle has three bolt patterns in all axles, 5 x 4.5" small ford, 5 x 4.75" GM and 5 x 5".
- Hub register size is 3.06" OD for aftermarket brake rotors.
- Flange outside diameter is 5.94" OD.
- 4 bolt axle retainers included; new style big ford (torino) with .375" (3/8") bolt holes or Old Style Big ford with .500" (1/2") bolt holes.
- 1/2" press in wheel studs included for street or custom wheels.
- 1/2" t-bolt or 3/8" t-bolt kit included depending on your choice of axle retainer.
- Axle can be cut to length with a cold saw or abrasive (chop) saw.
SPECIFICATIONS
- length 33" ( minimum length is 25.75").
- 31 spline length 8"
- brake offset 2.5"
- hub register OD is 3.06" for aftermarket brake rotors.
- Flange OD is 5.94"
WARNING:
Cancer
And Reproductive Harm-