80A MPPT Solar Panel Battery Charge Controller 12V/24V/36V/48V LCD Parallel

$153.99
Brand
PowMr
Type
Solar Charge Controller
Features
Corrosion Resistant, Flexible, Freestanding, Indicator Light, LCD Display, LED Indicator, Portable, Temperature Control, Temperature Sensor, Parallel
Resistance Properties
Corrosion Resistant
Current Type
DC
Current Rating
60Amps
Application
Home/Garden
Current Output
60Amps
Model
POW-M60-PRO
Power
720W~2800W
Voltage
DC12V 24V 36V 48V
Charging Mode
MPPT (Maximum Power Point Tracking)
Power Source
Solar
Pliability
Flexible
Colour
Grey and Orange
Country/Region of Manufacture
China
Recommended Environment
Indoor
condition
New
color
Grey and Orange
 
 
80A MPPT Solar Panel Battery Charge Controller 12V/24V/36V/48V LCD Parallel 

PowMr Solar Charger Controller MPPT 60A 12V 24V 36V 48V Blacklight LCD Regulator Max PV Input 150VDC Support Lithium batteries

 

 

POWMR 60Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 97%.

 

Feature:

- M6-PRO Support one-key restore function

- MPPT 30A/40A/50A/60A solar charge controller
- 100% MPPT technology
- 0 Layer, easy installation, easy setup
- Built-in DSP controller with high performance
- Automatic switch for 12V/24V/36V/48V battery bank
- 3-stage charging optimizes battery performance
- Overcharge protection, Input PV polarity reverse protection, Output limited current protection,
- Over-temperature protection
- Troubleshooting promotion function.
- Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc
- Easy to be mounted

 

 Specification:

Models

POW-M80-PRO

Solar Input Specification

Max. Solar Array Open-Circuit Voltage

160V

Maximum Input Power:

 

For 12V System

960W

For 24V System

1920W

For 36V System

2880W

For 48V System

3840W

Battery Charging Specification

Charging Technology

MPPT

Charging Algorithm

3 Stages

Charging Algorithm

12V/24V/36V/48V

Battery Voltage Range

9~60V

Rated Charging Current

80A

Maximum Efficiency

≤98%

MPPT Efficiency

>99%

Temperature Compensation

-3mV/°C/2V(default)

Self-Consumption

44mA/12V; 26mA/24V; 18mA/36V; 12mA/48V

Environment Specification

Operating Temperature Range

-35°C~+45°C

Humidity Range

≤95%,Non-condensing

Altitude

<3000m

General Specification

Protection Level

IP32

Dimensions

260x180x75mm

Net Weight

2kg

Package Includes

1 x 60A MPPT Solar Charge Controller

1 x English User Manual

  

 

Mounting information

  1. Battery must be connected first. NEVER connect the solar panel array to the controller without a battery.
  2. Ensure input voltage does not exceed 190 VDC to prevent permanent damage.
  3. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
  4. Do NOT connect any inverters or battery charger into the load terminal of the charge controller.
  5. Place the controller on a vertical surface protected from direct sunlight, high temperatures, and water. Make sure there is good ventilation.
  6. Please check for Clearance, verify that there is sufficient room to run wires, as well as clearance above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).
PushAuction