Concrete Power Screed with 7ft blade

The power screed is ideal for smoothing, leveling, and placing concrete on a horizontal surface. It is powered by a 4 stroke motor gas powered screeds not only are easier to use, require less manpower but also do a majority of the bull floating too. The ergonomical design and rubber isolators reduce vibration making the job easier for the operator.
Screed is the best solution for cutting the time to 1/4 compared to the traditional method while at the same time leaving a superior finish.

Power Screed Specs
Powered by 37.7cc Commercial Grade Engine
and comes with vibration isolators for comfort
Ergonomically Designed for easy use

2M Aluminum Blade
37.7cc. 4 cycle  gasoline engine power a well engineered and field proven eccentric system to frequencies up to 5200 rpm.
Swapping out beam lengths is easy which assures that you always have the right length for your project.
A strong, light weight frame allows the blades to be changed in seconds.
Lightweight Power unit and frame making it easy to maneuver and transport around the site.
Kick stand comes standard for keeping the motor upright and out of the cement.

Feature:

Model: GX35

Screed Length: 7ft (2M)

Frequency: 10000/9500 time/min

Fuel: 87# or 89# gasoline 

Speed: 5200 rpm

Power: 950W

Exciting force: 617lbs (280kg)

Weight: 51lbs (23kg)

Note:

1. Pls check the screws before use.

2. Pls remove the mud from the ruler after use.

3. When you use this machine for the first two times, pls change the oil every 20 hours and add no more than 80ML oil each time. you can change the oil every 50 hours after two or three times.