Divided into three sizes:

white (small)    12/02

red (medium),  25/02

green (large)     35/02

Equipped with positioning lines, capable of positioning up to 18.19 and 20MM

4 Methods of USE:

Preparation:

1) Prepare the root canal to produce a fully tapered shape. ​

2) Fill pup chamber with NaOCI, EDTA, or final rinse soulution. ​

3)Select the needle tip that manually fits loosely within 2mm of the working length. ​

4) Place the barrier sleeve over the complete length of the hand device. ​

5) Connect the needle tip to the hand device with the barrier sleeve. The activator should snap on firmly, promoting a secure connection with the hand device. ​

6) Press ON/OFF button for 1 second, you can see the battery power status. If the power is enough, you can continue the treatment. If the power is not enough, you need to replace the battery. ​7)Place the attached needle tip into the prepared root canal. ​

8) Drepress the ON/OFF button to actvate. Switch defaults to high speed upon activation. Depress the 3-speed switch to select medium speed or low speed. ​

9) Use a pumping action to move the hand device in short 2~3 mm vertical strokes. ​

10) Hydro dynamically agitate the medical solution for about 30-60 seconds.

​11) After washing, use a suction pipe to remove loose debris and sundries from the root canal.

​12) Repeat the above steps for each different root canal treatment .

​Package List: