56 Frame 13.6/6.8A Farm Duty Single Phase Motor 1 HP 1750RPM 115V/230V CW/CCW

Specification:

Frequency Rating：60 Hz
Phase: Single Phase
Reversible/Non-Reversible：Reversible CW/CCW
Nominal Rated Input Voltage：115/230V
Rated Load (HP)：1
Special Motor Construction：Spindle Motor
Current Type：AC
Shaft Diameter：５/8 in

Shaft Length：1.88 in
Enclosure Type： TEFC (Totally Enclosed Fan Cooled)
Insulation Class：F (Max 311°F)
Mounting Type：Base-Mounted
Pole :4
Amps：13.6/6.8A
Motor Type：Induction/Asynchronous
Base RPM：1750RPM
IP Rating：IP55
Protector：Yes
Housing Material：Rolled steel shell
Model：Farm Electric Motor
IEC Frame Size：56
Synchronous Speed:1800 RPM

Product Function Description:

Before using the electric motor, ensure that the wiring is correct, run the electric motor without load, and check whether the motor runs normally
Under the premise of not exceeding the load, the current of the circuit breaker should be more than three times the rated current of the electric motor before it can be started normally

Amps：Be sure to replace the motor with a full load current value of less than 10% of what you purchased

Totally Enclosed Fan Cooling (TEFC)：Prevent the free exchange of air between the inside and outside of the frame, but do not make the frame completely airtight.  The fan is mounted on the shaft and air is pushed onto the frame during operation to assist in the cooling process

RPM：Matching rpm is very important, the wrong speed can damage the pump, rpm do not need to be exactly matched, the difference can be close

Frame size：The size of the frame corresponds to the size of the motor.  Improper size of motor will lead to motor failure

Phase and voltage：A 230V motor single-phase power supply refers to a 1 phase 230V motor. It cannot withstand a voltage lower than 208V.  They will run too hot and the motor will fail

This product has undergone rigorous quality testing
Durable and easy to install and replace
The most cost-effective and best after-sales service
Quality assurance that gives you peace of mind

Features:

Before using the electric motor, ensure that the wiring is correct, run the electric motor without load, and check whether the motor runs normally
Under the premise of not exceeding the load, the current of the circuit breaker should be more than three times the rated current of the electric motor before it can be started normally
For the conversion of single-phase electric motor and three-phase electric motor with VFD, unpredictable problems may occur, and the operation is not simple, so it is not recommended for non-professional electricians to try.Please buy suitable motor to use
If you have any installation and use problems, you can provide clear wiring diagram (you can see the digital coding clearly), working video and so on to consult us. We will reply as soon as possible, please understand

Package Includes:

1 × 1HP Farm Electric Motor

Note：
We have warehouses in California and New Jersey.
We usually ship on a near by basis.
If one warehouse is out of stock, we will ship from another warehouse.
Thank you for your understanding